Reeco Soldering Technology
Soldering
Reeco is the own brand of the RENEX group from Włocławek and covers the equipment side of electronics production alongside its ESD workbenches. The range runs from solder pots through preheaters and hot air stations to wire feeders, dispensers, reballing accessories and fume extraction. The units are built for repair, rework and small series work, where repeatability matters more than cycle time.
The groups work together: the PH-A3 preheater is matched to the RA-250E hot air station, the RE-BN nozzles fit both stations and, through the RE-ADAPTER, handpieces from other manufacturers, and the reballing kit works with the same stations. Setting up a rework bench from one brand avoids checking compatibility on every accessory.
Solder PotsBaths from 36 mm to 98 x 121 mm, up to 5.5 kg of solder
PCB PreheatersAreas from 130 x 130 to 300 x 420 mm, up to 370 °C
Hot Air Stations and Nozzles600 and 800 W, 21 BGA nozzles from 3.5 to 45.5 mm
Solder Wire Feeders and DispensersTD-1 for 1 mm wire, RE-1900 from 0.01 ml
BGA ReballingHolder and stencils made to component data
Solder Fume ExtractionTwo arms, three-stage filtration with HEPA
| Group | Articles | Key figures |
|---|---|---|
| Solder pots | RE-30B, RE-50B, RE-600B | baths 36 to 121 mm, up to 5.5 kg, up to 500 °C |
| Preheaters | RE-IR-860, RE-PHA3, RE-QPHA3 | 130 x 130 to 300 x 420 mm, up to 370 °C, ±1 to ±5 °C |
| Hot air | RE-RA150E, RE-RA250E, 21 RE-BN nozzles, RE-ADAPTER | 600 and 800 W, 2 to 20 l/min |
| Feeding and dispensing | RE-TD1, RE-1900 | 1 mm wire, dispensing from 0.01 ml at ±5 percent |
| Reballing | RE-RKIT, RE-SZABLON | aluminium holder, stencil made to component data |
| Extraction | RE-FCE-001 with filters | two 1400 mm arms, three stages with HEPA, 210 W |
Typical applications: Repair and service benches for industrial electronics, rework in assembly production, prototype work in development and laboratory, training workshops and the overhaul of servers, controls and consumer devices.
