Festo CMMP-AS-C5-11A-P3-M0 (1622903) Motor Controller
€2,595.52
Excl. 19% VAT , excl. Shipping Cost
Article
FES-1622903
Manufacturer Nr.
CMMP-AS-C5-11A-P3-M0
Motor Controller
Frequently Bought Together
- This Item: €2,595.52Excl. 19% VAT , excl. Shipping Cost
- Festo CMMP-AS-C10-11A-P3-M3 (1501328) Motor Controller €3,224.02Excl. 19% VAT , excl. Shipping Cost
- Festo CMSX-P-S-C-U-F1-D-50-A (3929313) Positioner €696.07Excl. 19% VAT , excl. Shipping Cost
Total price
| Fastening type | on connection plate Permanently screwed |
| Product weight [g] | 3.800 |
| Display | Seven segment display |
| Permission | RCM mark c UL us - Listed (OL) |
| CE certificate (see declaration of conformity) | acc. to EU-EMV Directive acc. to EU Machine Directive acc. to EU Low voltage Directive acc. to EU-RoHS Directive |
| Bearing temperature [°C] | -25 to 70 |
| ambient temperature [°C] | 0 to 40 |
| Relative humidity | 0 - 90 % |
| Protection category | IP10 IP20 |
| Degree of contamination | 2 |
| Material information | LABS containing materials included RoHs compliant |
| Phase nominal operating voltage | 3-phase |
| Nominal operating voltage AC [V] | 400 |
| Permitted voltage oscillations | ± 10 % |
| Network frequency [Hz] | 50 to 60 |
| Nominal current [A] | 5,5 |
| Network filter | integrated |
| Max. intermediate circuit voltage DC [V] | 560 |
| Braking resistance [Ohm] | 68 |
| Impulse power braking resistance [kVA] | 8,5 |
| Nominal voltage logic supply DC [V] | 24 |
| Permitted range logic voltage | ± 20 % |
| Power input logic supply without parking brake [A] | 1,00 |
| Output voltage range AC | 3x 0 - 360 V |
| Nominal output current [A] | 5,0 |
| Nominal current per phase, effective [A] | 5,0 |
| Peak current per phase, effective [A] | 15 |
| Max. peak current duration [s] | 5 |
| Nominal performance controller [VA] | 3.000 |
| Peak performance [VA] | 6.000 |
| Output frequency [Hz] | 0 to 1000 |
| Parameterising interface | USB Ethernet Parameterising and commissioning |
| Fieldbus coupling | CANopen Modbus/TCP |
| Communication profile | DS301/DSP402 |
| Process coupling | I/O coupling for 256 mobile sets |
| Max. fieldbus transfer rate [Mbit/s] | 1 |
| Bus connector | Sub-D 9 pin Plug |
| Encoder output interface, properties | Resolution 16384 ppr |
| Encoder output interface, function | Actual value feedback via encoder signals for speed control mode Target value for downstream switched slave actuator |
| Encoder input interface, properties | EnDat HIPERFACE RS422 SINCOS 3 phase encoder signals |
| Encoder input interface, function | In synchronous mode as a speed preset of the slave actuator Encoder signal target speed value |
| Quantity digital logic inputs | 10 |
| Properties logic inputs | Freely configurable Galvanically separated |
| Work area logic input [V] | 8 to 30 |
| Quantity digital logic outputs 24 V DC | 5 |
| Properties digital logic outputs | Galvanically separated Partially freely configurable |
| Max. current digital logic outputs [mA] | 100 |
| Quantity analogue target value inputs | 2 |
| Properties target value inputs | Differential inputs Configurable for speed Configurable for current |
| Work area target value input | ± 10 V |
| Impedance target value input [kOhm] | 20 |
| Quantity analogue monitor outputs | 2 |
| Work area monitor outputs | ± 10 V |
| Resolution monitor outputs [Bit] | 9 |
| Properties monitor outputs | Short circuit proof |
| Certified awarding point | 01/205/5162.02/19 TÜV Rheinland |
| Safety function | Safe switched off torque (STO) Safe stop 1 (SS1) |
| Safety Integrity Level (SIL) | Safe switched off torque (STO) / SIL 3 / SILCL 3 |
| Performance Level (PL) | Safe switched off torque (STO) / category 4 performance level e |
| Diagnose degree of coverage [%] | 97 |
| SFF Safe Failure Fraction [%] | 99,17 |
| Hardware error tolerance | 1 |
| Proof test interval [A] | 20 |
| Manufacturer Nr. | CMMP-AS-C5-11A-P3-M0 |
|---|---|
| Manufacturer | Festo |
| EAN | 4052568243265 |
| Weight | 4.200000 |
| HS-Code | 85044085 |
Customers Who Bought This Item Also Bought
