Festo CPX-E-4IOL (4080495) Io-Link Master Modul
€282.56
Excl. 19% VAT , excl. Shipping Cost
Article
FES-4080495
Manufacturer Nr.
CPX-E-4IOL
Io-Link Master Modul
Frequently Bought Together
- This Item: €282.56Excl. 19% VAT , excl. Shipping Cost
- Festo CPX-E-4AI-U-I (4080493) Analogue Input Modul €353.21Excl. 19% VAT , excl. Shipping Cost
- Festo CPX-P-AB-4XM12-4POL-8DE-N-IS (565705) Manifold Block €100.44Excl. 19% VAT , excl. Shipping Cost
Total price
| Dimensions W x L x H | 18.9 mm x 76.6 mm x 124.3 mm |
| Pitch dimension [mm] | 18,9 |
| Diagnosis via LED | Error per module Status per channel |
| Diagnosis via bus | Under-voltage general error Device missing/failed Wire break Module error Short circuit Parameter error under running/over running |
| Module parameter | Diagnosis short circuit actuator supply Deactivate sensor supply Behaviour after short circuit/overload |
| Channel parameter | Deactivate actuator supply Device error code Force channel x Channel mode channel status cycle time |
| Fuse (short circuit) | internal electronic fuse, load per channel internal electronic fuse, sensor per module |
| Intrinsic power input operating voltage load | Type 15 mA |
| Nominal operating voltage DC outputs [V] | 24 |
| Potential separation channel - internal bus | no |
| Potential separation channel - channel | no |
| Permitted voltage oscillations outputs | ± 25 % |
| Voltage supply, connection type | Multi tube holder |
| Voltage supply, connection technology | Spring tension clamp |
| Voltage supply, number of poles/wires | 4 |
| Voltage supply, conductor cross-section [mm²] | 0.2 to 1.5 |
| Voltage supply, information on conductor cross-section | 0.2 - 2.5 mm² for flexible conductor without wire end sleeve |
| Permission | RCM mark |
| CE certificate (see declaration of conformity) | to EU EMC directive |
| Oscillation strength | Transport use test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with degree of severity 1 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistant class KBK | 0 - No corrosion stressing |
| Bearing temperature [°C] | -20 to 70 |
| Relative humidity | 95 % Not condensing |
| Protect against direct and indirect contact | Funktionskleinspannung mit sicherer Trennung (PELV) |
| Protection category | IP20 |
| ambient temperature [°C] | -5 to 50 |
| Information about ambient temperature | -5 - 50 °C with horizontal installation |
| Product weight [g] | 96 |
| Fastening type | With Slot rail |
| Material information | LABS containing materials included RoHs compliant |
| Housing material | PA |
| Intrinsic power input operating voltage electronics/sensors | Type 50 mA |
| Nominal operating voltage DC electronics / sensor [V] | 24 |
| Permitted voltage oscillations electronics/sensors | ± 25 % |
| Report | IO-Link |
| IO-Link, report | Master V 1.1 |
| IO-Link, communication mode | configurable using software SIO, COM1 (4.8 kBaud), COM2 (38.4 kBaud), COM3 (230.4 kBaud) |
| IO-Link, port type | B |
| IO-Link, number of ports | 4 |
| IO-Link, process data width OUT | Parameterisable 8 - 32 Bytes |
| IO-Link, process data width IN | Parameterisable 8 - 32 Bytes |
| IO-Link, minimum cycle time | Depends on minimum supported cycle time of the connected IO link devices |
| IO-Link, communication | C/Q LED green |
| Electrical connection IO link, connection type | 4x multi tube holder |
| Electrical connection IO link, connection technology | Spring tension clamp |
| Electrical connection IO link, number of pins / wires | 6 |
| Electrical connection IO link, conductor cross-section [mm²] | 0.2 to 1.5 |
| Electrical connection IO link, information on conductor cross-section | 0.2 - 2.5 mm² for flexible conductor without wire end sleeve |
| Manufacturer Nr. | CPX-E-4IOL |
|---|---|
| Manufacturer | Festo |
| EAN | 4052568291150 |
| Weight | 0.120000 |
| HS-Code | 85389099 |
Customers Who Bought This Item Also Bought
Festo CPX-P-AB-4XM12-4POL-8DE-N-IS (565705) Manifold Block
€100.44
Excl. 19% VAT , excl. Shipping Cost
