The product may differ from the illustration
Festo pneumatic component for industrial automation and compressed-air applications in proven quality.
Analogue Input Modul CPX-E-4AI-U-I - Festo 4080493
FESTO
Original product
Net price (excl. VAT)
€345.26
Excl. 19% VAT ,
excl. Shipping Cost
Available
Fast shipping
Item
FES-4080493
Manufacturer no.
CPX-E-4AI-U-I
Personal expert advice
Brand new
Specialist dealer since 2009
Original product
Worldwide shipping
Product data
Manufacturer no.CPX-E-4AI-U-I
EAN4052568291136
Customs tariff number85389099
ConditionNew
Article
FES-4080493
Frequently Bought Together
-
This Item:
€345.26Excl. 19% VAT , excl. Shipping Cost
-
Electrical Connection CAPC-F1-E-M12 - Festo 570042
€91.57Excl. 19% VAT , excl. Shipping Cost
-
Controller CECC-S - Festo 574416
€821.47Excl. 19% VAT , excl. Shipping Cost
Total price
Festo pneumatic component for industrial automation and compressed-air applications in proven quality. The key technical data of this genuine Festo article are listed below.
| Dimensions W x L x H | 18.9 mm x 76.6 mm x 124.3 mm |
| Pitch dimension [mm] | 18,9 |
| Diagnosis via LED | Error per channel<br>Error per module |
| Diagnosis via bus | Wire break<br>Short circuit/overload sensor supply<br>Parameter error<br>Parametering error<br>overload analogue inputs<br>upper limit value not held<br>Over/under running<br>Lower limit value not maintained |
| Module parameter | Data format analogue inputs<br>Diagnosis short circuit sensor supply<br>Diagnosis parametering error<br>Diagnosis overload analogue inputs<br>Hysteresis limit value monitoring<br>Deactivate sensor supply<br>Behaviour after overload analogue inputs<br>Behaviour after short circuit/overload |
| Channel parameter | Diagnosis wire break<br>Diagnosis upper limit value<br>Diagnosis parameter error<br>Diagnosis lower limit value<br>Diagnosis under running/over running<br>Smoothing factor<br>Signal range per channel<br>lower/upper limit value |
| Fuse (short circuit) | Internal electronic fuse Per module |
| Potential separation channel - internal bus | yes |
| Potential separation channel - channel | no |
| Permission | RCM mark |
| CE certificate (see declaration of conformity) | to EU EMC directive |
| Oscillation strength | Transport use test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with degree of severity 1 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistant class KBK | 0 - No corrosion stressing |
| Bearing temperature [°C] | -20 to 70 |
| Relative humidity | 95 %<br>Not condensing |
| Protection category | IP20 |
| ambient temperature [°C] | -5 to 50 |
| Information about ambient temperature | -5 - 60 °C with vertical installation |
| Product weight [g] | 96 |
| Fastening type | With Slot rail |
| Material information | LABS containing materials included<br>RoHs compliant |
| Housing material | PA |
| Quantity inputs | 4 |
| Intrinsic power input operating voltage electronics/sensors | Type 70 mA |
| Max. cumulative current inputs per module [A] | 1,4 |
| Nominal operating voltage DC electronics / sensor [V] | 24 |
| Permitted voltage oscillations electronics/sensors | ± 25 % |
| Max. address volume inputs [Byte] | 8 |
| Electrical connection: input, function | Analogue input |
| Electrical connection: input, connection type | 4x multi tube holder |
| Electrical connection: input, connection technology | Spring tension clamp |
| Electrical connection: input, number of pins / wires | 4 |
| Electrical connection: inlet, conductor cross-section [mm²] | 0.2 to 1.5 |
| Electrical connection: inlet, information on conductor cross-section | 0.2 - 2.5 mm² for flexible conductor without wire end sleeve |
| Measured parameter | Voltage<br>Current |
| Repeatability | ±0.1 % at 25 °C |
| Use error limits related to ambient temperature range | ±0,3 % |
| Base error limit at 25 °C | ±0,2 % |
| Power blackout bridging [ms] | 10 |
| Signal range | -10 - 10 V<br>-20 - 20 mA<br>-5 - 5 V<br>0 - 10 V<br>0 - 20 mA<br>1 - 5 V<br>4 - 20 mA |
| Data format | 15 bit + sign<br>linear scale |
| Max. line length | 30 m<br>Shielded |
| Electrical connection: input 2, function | Functional ground |
| Electrical connection: input 2, connection type | Multi tube holder |
| Electrical connection: input 2, connection technology | Spring tension clamp |
| Electrical connection: input 2, number of pins / wires | 4 |
| Electrical connection: input 2, wiring diagram | 00995842 |
| Electrical connection: input 2, conductor cross-section [mm²] | 0.2 to 1.5 |
| Electrical connection: inlet 2, information on conductor cross-section | 0.2 - 2.5 mm² for flexible conductor without wire end sleeve |
| Manufacturer Nr. | CPX-E-4AI-U-I |
|---|---|
| Manufacturer | Festo |
| EAN | 4052568291136 |
| Weight | 0.096000 |
| HS-Code | 85389099 |
| GPSR manufacturer information | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Article authenticity | Original product |
| Condition of article | New |
| Werkstoff | Polyamid (PA) |
| Schutzart | IP20 |
Write Your Own Review
Customers Who Bought This Item Also Bought
Manifold Block CPX-P-AB-2XKL-8POL-8DE-N-IS - Festo 565703
€75.52
Excl. 19% VAT ,
excl. Shipping Cost
Related Products
Check items to add to the cart or
