Multitools
Special Purpose Tools
Multitools combine several blades or drive profiles in a single handle and replace a complete screwdriver set in field service. Folding tools of the pocket-knife type carry 7 to 9 blades, typically hex keys from 1.5 to 8 mm and TORX Tamper Resistant profiles from T7H to T40H with a pin bore. The group is completed by screw extractors in CrVMo steel from 2.0 to 10.0 mm, HSS pilot drills from 2.3 to 5.7 mm and scribing and marking tools. The category holds 62 articles from Wiha, C.K, Bahco, Bernstein, Weidmüller and Wera.
| Version | Blades | Range | Application |
|---|---|---|---|
| Folding tool, hex | 7 blades | 1.5 to 6 mm or 2 to 8 mm | Socket head screws in equipment and plant |
| Folding tool, hex ball-end | 7 blades | 2 to 8 mm | Angled access to concealed screws |
| Folding tool, TORX Tamper Resistant | 7 or 8 blades | T7H to T25H, T9H to T40H | Security screws with centre pin |
| Folding tool, mixed | 8 or 9 blades | Slotted, Phillips, TORX, hex | Service work without a full tool case |
| Screw extractor | Single tool | 2.0 to 10.0 mm, CrVMo steel | Seized and rounded-off screws |
| HSS pilot drill | Single tool | 2.3 to 5.7 mm | Pre-drilling the damaged screw head |
Typical applications: Field service work with limited tool baggage; control cabinet and plant assembly; equipment repair and stripping of assemblies; freeing seized or rounded screws with pilot drill and extractor; opening enclosures held by security screws; scribing and centre marking on sheet metal and housing parts before drilling.
