Laser Distance Meter 80 m with 1.0 mm Tolerance and Stake-Out - Leica DISTO D210

Recording as-built plans or producing take-off for invoicing needs more than a distance. The Leica DISTO D210 measures typically from 0.05 to 80 m with a 1.0 mm tolerance and calculates area, volume and Pythagoras in the device, including a stake-out function for repeating grids.

Benefits

• 1.0 mm tolerance: tighter than the entry class, which makes the unit suitable for billing take-off and as-built documentation.
• 80 m typical range: up to 100 m against the Leica GZM26 target plate, still 50 m under unfavourable conditions.
• Stake-out function: marks fixed spacings on a wall or floor, for stud grids and drilling patterns, without laying out a tape again and again.
• Pythagoras with 2 and 3 points: derives heights that cannot be reached directly, such as gables and ceiling heights above fixtures.
• Automatic multifunctional end piece: detects the reference edge by itself, which prevents sign errors when measuring out of corners.
• Illuminated three-line display and memory for 10 results: intermediate values stay readable, including in a dark plant room.

Technical data

Applications

Take-off for invoicing and quoting, as-built documentation of buildings, drywall and interior fit-out, electrical and plumbing installation, shopfitting, tendering and site management.

Compatibility and scope of delivery

The Leica GZM26 target plate can be used for long distances. Supplied with the DISTO D210 meter, belt pouch, 2 x AAA batteries, hand loop, user manual on CD, quick start guide, protect card, safety instructions and the Calibration Certificate Silver.

Standards and notes

Laser class 2 per IEC 60825-1. The DISTO D210 does not transfer data over Bluetooth, results are read on the device. EAN, country of origin and customs code are not available for this item and are supplied on request.