Laser Distance Meter 150 m Drop Tested to 2 m with IP65 and Bluetooth - Leica DISTO X3
-
This Item:
€285.30
-
P2P Extension Set with TRI 120 Tripod, Case and Target Plate for DISTO X6 - Leica DST 360-X
€897.71
-
Laser Distance Meter 100 m with Bluetooth and End Piece Detection - Leica DISTO D2
€187.44
Site measuring rarely fails because of the optics, it fails because of the environment. The Leica DISTO X3 measures from 0.05 to 150 m with a tolerance of ±1.0 mm and is built to live in a tool box between dust and spray water. Its housing meets IP65 and withstands drops from 2 m.
Benefits
- Measuring range 0.05 to 150 m with ±1.0 mm tolerance under favourable conditions, smallest displayed unit 0.1 mm.
- IP65 housing, dust tight and protected against jet water, drop tested from 2 m. Cleaning under running water is no problem.
- Tilt sensor over a full 360° with ±0.2° tolerance, the basis for Smart Horizontal Mode and indirect height measurement past obstacles.
- Bluetooth v4.0 transfers readings up to 10 m into the Leica DISTO Plan app. Keyboard mode feeds values into any software without an app.
- Automatic 5 cm end piece detects the measuring reference by itself, so readings from corners and edges need no mental arithmetic.
- Two AA batteries deliver up to 4000 measurements or 8 hours of operation, and replacements are available anywhere.
- The Leica DST 360 adapter adds point to point measurement and the Smart Area function for complex shapes.
Technical data
| Feature | Value |
|---|---|
| Range, favourable conditions | 0.05 to 150 m |
| Range, unfavourable conditions | 0.05 to 80 m |
| Accuracy, favourable conditions | ±1.0 mm |
| Accuracy, unfavourable conditions | ±2.0 mm |
| Smallest unit displayed | 0.1 mm |
| X-Range Power Technology | yes |
| Laser class | 2, 635 nm, below 1 mW |
| Laser dot diameter | 6 / 30 / 60 mm at 10 / 50 / 100 m |
| Tilt measuring range | 360° |
| Tilt tolerance | ±0.2° |
| Protection class | IP65, dust tight and jet water protected |
| Drop test | 2 m height |
| Bluetooth | Bluetooth Smart v4.0, range up to 10 m |
| Power supply | 2 x AA |
| Battery life | up to 4000 measurements or 8 hours of operation |
| Automatic laser switch off | after 90 s |
| Automatic power switch off | after 180 s |
| Dimensions H x D x W | 132 x 56 x 29 mm |
| Weight with batteries | 188 g |
| Operating temperature | -10 to 50 °C |
| Storage temperature | -25 to 70 °C |
| Shipping dimensions | 17.2 x 9.8 x 8.7 cm |
| EAN | 7640110697047 |
| Customs tariff code | 9015100000 |
| Country of origin | Hungary |
Functions
- Distance measuring, min and max measuring, permanent measuring, stake out, addition and subtraction.
- Area, volume, triangle area and room angle, painter function for areas built from partial measurements.
- Pythagoras with 3 points, Smart Horizontal Mode, indirect height, level function.
- Memory, timer, beep, rotating display content, personalised favourite keys.
- Point to point measuring and Smart Area with the Leica DST 360 adapter, Smart Room with the Leica DISTO Plan app.
Applications
Interior fit out, drywall, window and door measuring, area and volume figures for quotations and invoicing, surveys in occupied buildings and check or stake out measurements on the shell. IP65 and the drop test make it suitable for dusty and wet sites.
Compatibility and scope of delivery
Matching accessories are the Leica TRI 100 and TRI 120 tripods, the FTA 360 aiming adapter, the DST 360 P2P adapter and the GZM 3 and GZM 26 target plates. Data transfer runs through the Leica DISTO Plan app for iOS and Android or DISTO transfer for Windows.
- Leica DISTO X3, 1 piece
- Pouch, 1 piece
- Hand loop, 1 piece
- AA battery, 2 pieces
- Quick start guide, warranty card and safety manual, 1 set
- Calibration Certificate Silver, 1 piece
Standards and marking
Laser class 2 in accordance with IEC 60825-1. Country of origin Hungary, customs tariff code 9015100000, EAN 7640110697047. The delivery contains batteries, which matters for shipping. Registering the unit within 8 weeks of purchase at disto.com/warranty extends the manufacturer warranty to 3 years.
| Norm | DIN EN 60825-1 |
|---|---|
| Manufacturer Nr. | 850833 |
| Manufacturer | Leica Geosystems |
| Country of Manufacture | Hungary |
| EAN | 7640110697047 |
| Weight | 0.183000 |
| HS-Code | 9015100000 |
| GPSR manufacturer information | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Article authenticity | Original product |
| Condition of article | New |
| Protection rating | IP65 |
| Operating time (h) | 8.000000 |
| Laser class | 2 |












