What are soldering and desoldering tips and what industrial applications require them?

Soldering and desoldering tips are precision metal attachments that transfer heat from soldering stations to create or remove electrical connections on electronic components. These specialized tools are essential in electronics manufacturing, PCB assembly lines, automotive electronics production, telecommunications equipment servicing, and repair facilities where circuit boards require component-level modifications. The tips feature engineered geometries like conical, chisel, and knife shapes to accommodate different joint types, component sizes, and access angles on densely populated circuit boards.

What technical criteria determine the correct soldering tip selection for specific applications?

Soldering tip selection depends on tip geometry, thermal mass, and dimensional compatibility with target components and solder joints. For surface-mount components, conical tips like the OKI SFV-CNL14 with 1.4mm diameter provide precise heat application, while hoof-shaped tips such as the SFP-WV20 measuring 2x11.6mm offer broader contact area for drag soldering techniques. Knife-shaped tips like the SCV-DRK45A at 5x15.1mm dimensions enable efficient desoldering of through-hole components, and chisel tips with 30° angles such as the PHT-751367 measuring 3x16.5mm facilitate heat distribution across larger solder joints.

Which international standards govern soldering tip manufacturing and performance requirements?

Soldering tips must comply with IPC-A-610 acceptability standards for electronic assemblies, which define joint quality criteria and thermal transfer requirements. ISO 9001 quality management systems ensure consistent manufacturing tolerances and material specifications, while IEC 61340-5-1 addresses electrostatic discharge control requirements for ESD-sensitive component handling. RoHS compliance under EN 50581 restricts hazardous substances in tip coatings and base materials, ensuring environmental safety and compatibility with lead-free soldering processes mandated by international electronics regulations.

What are the differences between OKI SxP, SxV, and PHT series soldering tip variants?

The OKI SxP series features compact geometries with 11.6mm length dimensions optimized for fine-pitch surface-mount work and precision applications requiring minimal thermal mass. SxV series tips offer extended lengths up to 18.7mm with enhanced thermal capacity for through-hole components and higher power soldering operations. PHT series tips incorporate specialized coatings and reinforced construction for extended service life in high-volume production environments, with variants like the PHT-754627 featuring mini hoof geometry at 1x15mm for accessing restricted spaces between components.

What installation requirements and compatibility factors apply to soldering tip mounting systems?

Soldering tips require compatible heating element interfaces and proper thermal coupling to achieve specified operating temperatures and heat transfer efficiency. Most industrial soldering stations utilize standardized cartridge-style mounting systems with spring-loaded retention mechanisms ensuring secure tip installation and optimal thermal contact. The tip-to-heater interface must maintain consistent pressure and electrical conductivity for temperature sensor feedback, while quick-change mechanisms enable rapid tip exchanges during production runs without tool disassembly or recalibration procedures.

What safety ratings and operating parameters define soldering tip performance limits?

Professional soldering tips operate within temperature ranges from 200°C to 450°C with thermal stability tolerances of ±5°C for consistent joint formation and component protection. ESD-safe variants maintain surface resistivity values between 10^6 to 10^9 ohms per IEC 61340 standards, preventing electrostatic discharge damage to sensitive semiconductor devices. The tips feature protective coatings resistant to oxidation and thermal cycling, with working voltages typically limited to 24V DC for operator safety and compliance with low-voltage equipment directives in industrial environments.

What maintenance schedules and service life expectations apply to industrial soldering tips?

Soldering tips require daily cleaning with damp sponges or brass wool to remove flux residue and oxidation buildup that degrades heat transfer efficiency. Tip replacement intervals depend on usage intensity but typically range from 200 to 1000 operating hours based on temperature settings, flux chemistry, and handled materials. Visual inspection for wear patterns, pitting, or geometric deformation should occur during each shift change, while tip conditioning with fresh solder and flux activators maintains optimal wetting characteristics and extends service life in high-volume production applications.

Soldering and desoldering tips

OKI

Add to Wish List Add to Compare

OKI STV-CNB04AR. Soldering tip SxV series, conical angled 0.4x19.6 mm
€13.35
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI SFV-CH10A. Soldering tip SxV series chisel-shaped 1x18.3 mm
€12.97
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI STV-CH10A. Soldering tip SxV series chisel-shaped 1x18.3 mm
€12.97
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI SCV-CH10A. Soldering tip SxV series chisel-shaped 1x18.3 mm
€12.97
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI STV-CH15A. Soldering tip SxV series chisel-shaped 1.5x11.3 mm
€12.97
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI SFV-CH50A. Soldering tip SxV series chisel-shaped 5x11.3 mm
€12.97
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI STV-CH50A. Soldering tip SxV series chisel-shaped 5x11.3 mm
€12.97
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI SCV-CH50A. Soldering tip SxV series chisel-shaped 5x11.3 mm
€12.97
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI SCV-CH15A. Soldering tip SxV series chisel-shaped 1.5x11.3 mm
€12.90
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI STV-CH25AR. Soldering tip SxV series chisel-shaped 2.5x13.4 mm
€12.88
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI STV-DRH20. Soldering tip SxV series hoof-shaped bevelled, 2x14 mm
€12.87
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI SCV-DRH20. Soldering tip SxV series hoof-shaped bevelled, 2x14 mm
€12.87
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI SFV-DRH20. Soldering tip SxV series hoof-shaped bevelled, 2x14 mm
€12.87
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI SCV-CH25. Soldering tip SxV series chisel-shaped 2.5x11 mm
€12.57
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI SCV-CNL20. Soldering tip SxV Series conical long 2x15 mm
€12.57
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI Sfv-Ch20. Soldering tip SxV series chisel-shaped 2x11 mm
€12.57
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI SFV-CNL10. Soldering tip SxV Series conical long 1x13 mm
€12.57
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI SCV-CNB04A. Soldering tip SxV series, conical angled 0.4x15.5 mm
€12.51
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI SFV-CNB04A. Soldering tip SxV series, conical angled 0.4x15.5 mm
€12.51
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI SFV-CH25. Soldering tip SxV series chisel-shaped 2.5x11 mm
€12.47
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI SFV-CH50. Soldering tip SxV series chisel-shaped 5x10 mm
€12.47
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI STV-CH25. Soldering tip SxV series chisel-shaped 2.5x11 mm
€12.38
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI SCV-CNB05. Soldering tip SxV series conical angled, 0,5x13 mm
€12.38
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

OKI STV-CNL04. Soldering tip SxV Series conical 0.4x13.6 mm
€12.38
Excl. 19% VAT , excl. Shipping Cost

OKI soldering and desoldering tips are precision-engineered for use with OKI Metcal and Hakko-compatible stations, delivering tip temperatures stable to within ±2 °C across a working range of 200-450 °C. The copper-core construction with iron-clad and micro-bonded solder-wettable zones ensures thermal recovery rates sufficient for lead-free alloys (Sn96.5Ag3Cu0.5, liquidus 217 °C), while tip-to-ground resistance values remain below 2 Ω to protect ESD-sensitive components rated down to 100 V HBM (IEC 61340-5-1, IPC-A-610).

As a specialist distributor for OKI soldering technology, esd.equipment stocks 237 tip variants - covering conical, chisel, bevel, hoof, knife and micro-desoldering geometries - all compliant with IPC J-STD-001 process requirements. Each tip ships with full traceability documentation, compatible with OKI MFR-H6 and MFR-H6-SC handpieces.

Key technical advantages - OKI Löt- und Entlötspitzen at a glance

⚡ 200-450 °C working range - ±2 °C thermal stability, lead-free alloy compatible

🛡 <2 Ω tip-to-ground resistance - ESD-safe per IEC 61340-5-1, protects 100 V HBM devices

⚙ Copper-core construction - iron-clad tip body for rapid thermal recovery on Sn96.5Ag3Cu0.5

↕ Conical to hoof geometries - 237 variants covering 0402 micro-SMD to through-hole rework

📝 IPC J-STD-001 compliant - full lot traceability, compatible with MFR-H6 and MFR-H6-SC

✓ Micro-bonded wettable zone - extended service life, reduced oxide build-up in production use

OKI Löt- und Entlötspitzen - Product overview

Tip Series	Geometry	Temp. Range	Typical Application
Conical (C-series)	Conical, 0.2-1.0 mm	200-450 °C	Fine-pitch SMD, 0402/0201 components
Chisel (D-series)	Chisel, 1.0-4.0 mm	200-450 °C	General SMD, drag-soldering, IC leads
Bevel (B-series)	Bevel, 1.5-3.5 mm	200-450 °C	QFP, SOP, high-volume drag soldering
Hoof / Gull-wing (H-series)	Hoof, 2.0-5.0 mm	200-450 °C	Gull-wing IC, connector pad tinning
Knife (K-series)	Knife blade, 3.0-6.0 mm	200-450 °C	Lead cutting, flux removal, desoldering
Desoldering nozzles	Hollow nozzle, 0.8-3.2 mm ID	200-420 °C	Through-hole desoldering, rework stations

Typical application areas: Electronics manufacturing and SMT assembly (IPC J-STD-001, IPC-A-610), semiconductor packaging and die-attach rework (SEMI S1/S2), medical device PCB assembly (ISO 13485), automotive electronics production and rework (IATF 16949, VDA 6.3), aerospace and defense PCB repair (AS9100D, IPC-7711/7721), and R&D laboratory prototyping requiring ±2 °C process control.

✓

237 OKI tip variants in stock Conical, chisel, bevel, hoof, knife and desoldering nozzle series

📦

MFR-H6 and MFR-H6-SC compatible Full OKI handpiece compatibility, traceable lot documentation included

🛡

ESD-safe, <2 Ω tip-to-ground IEC 61340-5-1 and IPC J-STD-001 compliant process safety