Dosing devices

Q: What are dosing devices and what industrial applications require precision fluid dispensing equipment?

Dosing devices are precision pneumatic and hydraulic instruments that control the exact quantity and timing of fluid dispensation in industrial processes. These systems are essential in automotive assembly for adhesive and sealant application, electronics manufacturing for conformal coating and potting compounds, pharmaceutical production for exact volume dispensing, and aerospace component bonding where material waste must be minimized. The Nordson EFD Ultimus series offers timing precision from 0.0001 to 999.9 seconds, enabling repeatable dispensing cycles for high-volume production lines where consistency directly impacts product quality and regulatory compliance.

Q: What technical specifications should engineers consider when selecting pneumatic dosing equipment for industrial applications?

Critical selection parameters include operating pressure range, timing resolution, media viscosity compatibility, and dispensing volume accuracy. The Nordson EFD Performus-X100 operates at 0-7 bar pressure range while the X15 model handles lower pressures of 0-1 bar, making pressure matching essential for proper system integration. Timing precision varies significantly between models, with the UltimusPlus series offering 0.0001-99.9 second resolution compared to basic analog systems without digital timing control. Viscosity handling capability determines whether low-viscosity solvents or high-viscosity adhesives can be processed, while dispensing volume repeatability typically ranges from ±1% to ±5% depending on system configuration and calibration.

Q: Which international standards and certifications apply to industrial dosing equipment in European manufacturing facilities?

Industrial dosing systems must comply with EN 60204-1 for electrical safety in machinery, ISO 9001 quality management requirements for manufacturing processes, and ATEX 2014/34/EU directive when handling flammable or explosive materials in hazardous environments. Pneumatic components require compliance with ISO 4414 compressed air system standards, while hydraulic dosing equipment follows ISO 4413 specifications for fluid power systems. Food-grade and pharmaceutical applications demand FDA 21 CFR Part 177 material compliance for wetted components, and medical device manufacturing requires ISO 13485 quality system certification. ESD-safe variants must meet IEC 61340-5-1 standards for electrostatic discharge protection in electronics assembly environments.

Q: How do analog and digital dosing systems differ in functionality and which applications benefit from each type?

Analog dosing systems like the Nordson EFD Performus-I provide continuous pressure regulation without timing control, making them suitable for manual dispensing operations where operators control start and stop functions. Digital systems such as the Ultimus series offer programmable timing cycles from 0.0001 seconds with precise repeatability, essential for automated production lines requiring consistent dispensing volumes. The UltimusPlus II provides enhanced timing range compared to the standard Ultimus I model, while 2K dosing systems like the EQUALIZER handle dual-component materials with precise mixing ratios. Vacuum-assisted systems prevent dripping and material waste between dispensing cycles, crucial for expensive materials or clean-room environments where contamination must be eliminated.

Q: What installation requirements and system compatibility factors must be considered for pneumatic dosing equipment?

Dosing systems require clean, dry compressed air supply at 90-120 psi with ISO 8573-1 Class 2 filtration standards to prevent contamination and ensure valve longevity. Electrical connections typically use 24V DC or 110/230V AC power supplies with standard industrial connectors compatible with PLC control systems through discrete I/O or fieldbus communication protocols. Mounting configurations include benchtop units for manual operations, panel-mount systems for integration into automated equipment, and rack-mount versions for multi-head dispensing stations. Cartridge handling systems accommodate standard 30cc, 55cc, and 310ml cartridge sizes with quick-change mechanisms, while bulk material systems require appropriate supply tank pressurization and material feed line sizing based on viscosity and dispensing distance requirements.

Q: What safety ratings and environmental operating specifications apply to industrial dosing equipment?

Industrial dosing systems typically operate within temperature ranges of 10°C to 50°C ambient conditions with storage capabilities from -20°C to 70°C for stable performance across varying environmental conditions. Pressure ratings vary from low-pressure systems handling 0-1 bar for delicate applications to high-pressure variants operating up to 7 bar for viscous materials and long dispensing lines. IP40 to IP65 ingress protection ratings ensure reliable operation in dusty workshop environments, while specialized cleanroom versions meet ISO 14644 Class 100 to Class 10,000 particle contamination standards. ATEX-certified models provide intrinsic safety for Zone 1 and Zone 2 hazardous areas when dispensing flammable solvents or working near ignition sources, with surface temperature limitations preventing material degradation or safety hazards.

Q: What maintenance procedures and service intervals are required for pneumatic dosing equipment to ensure reliable operation?

Preventive maintenance includes daily air filter inspection and weekly compressed air moisture checks to prevent contamination-related valve failures and dispensing inconsistencies. Dispensing valve seals require replacement every 500,000 to 2 million cycles depending on material abrasiveness and operating pressure, while pneumatic actuator components need annual lubrication and seal inspection for optimal performance. Calibration verification should occur monthly using precision scales to confirm dispensing volume accuracy within ±2% tolerance, with full system recalibration performed annually or after any major component replacement. Filter elements in compressed air lines require quarterly replacement or when pressure differential exceeds 0.5 bar, and material supply lines need flushing between different material types to prevent cross-contamination and chemical incompatibility issues that could damage wetted components.

Dispensing

Nordson EFD and Oki dispensing devices regulate dispensing pressure and time for reproducible, precise delivery of adhesives, solder pastes, fluxes and other paste-form or liquid materials. The Ultimus series (I and V) covers a pressure range of 0 to 7 bar with timing control from 0.0001 to 999.99 seconds. The Ultimus V adds a vacuum function that activates suckback after dispensing to prevent dripping. Performus and Performus-X devices offer analogue and digital pressure regulation for low- and high-viscosity media.

Alongside Nordson EFD and Oki we carry the Reeco RE-1900 pneumatic dispenser. It meters from 0.01 ml with a repeatability of ±5 percent, dispensing time is programmable in four ranges from 0.01 to 20 s and output pressure is adjustable from 1 to 100 psi. An anti-drip function draws the medium back after the pulse, and operation runs from a foot pedal or the button on the syringe adapter. Syringes, needles, hoses, stand and case are included.

⚡ Pressure range 0-7 bar / 0-100 psi - Ultimus V and Performus X100 for low- to high-viscosity media

⚙ Timing 0.0001-999.99 sec - Ultimus I/II for reproducible dispensed quantities via precise time setting

✓ Vacuum function (Ultimus V) - active suckback prevents dripping after the dispensing cycle

🛡 2K dispenser Equalizer (EFD 7360152) - for uniform two-component dispensing

📦 Universal centrifuge (EFD 7015542) - degassing of bubble-containing cartridge contents before dispensing

Series	Pressure	Control	Note
Ultimus I (EFD 7017041)	0-7 bar	0.0001-999.99 sec	Standard timed dispenser
UltimusPlus I (EFD 7364361)	0-7 bar	0.0001-99.9 sec	Enhanced Ultimus I version
UltimusPlus II (EFD 7364362)	0-7 bar	0.0001-99.9 sec	Two pressure circuits, extended functions
Ultimus V (EFD 7015293)	0-7 bar	0.0001-999.9 sec	Timer + vacuum function
Performus I (EFD 7012330)	0-7 bar	Analogue, no timer	Simple pressure regulator
Performus X15 (EFD 7363257)	0-1 bar	Regulator 0-15 psi	For low-viscosity media
Performus X100 (EFD 7363256)	0-7 bar	Regulator 0-100 psi	For high-viscosity materials
Oki DX-250	0-6.9 bar	Digital, programmable	Low- and high-viscosity
Oki DX-350	0-6.9 bar	Digital, programmable	Extended Oki version
Oki DX-255	0-1 bar	Digital	Low-viscosity media <1 bar

Key figure	Value
Smallest shot	0.01 ml
Repeatability	±5 percent
Dispensing time	0.01 to 1 s, 0.1 to 10 s, 0.2 to 20 s, 0.3 to 20 s
Input pressure	35 to 100 psi
Output pressure	1 to 100 psi
Dimensions and weight	238 x 150 x 60 mm, 1.7 kg

Typical applications: Precision dispensing of solder pastes, adhesives and fluxes in SMT production lines, semi-automatic dispensing of encapsulants and UV adhesives in electronics assembly, application of lubricants and sealants in automotive manufacturing, dispensing of low-viscosity media with Oki DX-255 in laboratory analytics, and quality control and series production with documented dispensing time.

✓ Nordson EFD & Oki distributorUltimus, Performus, Equalizer, UltimusPlus

📦 Accessories from one sourceCartridge holders, foot pedals, collection trays, centrifuge

Add to Wish List Add to Compare

Precision needle valve 741V-AL for low viscosity fluids, aluminium - Nordson EFD 7021235
€3,188.91
Add to Wish List Add to Compare

OKI DX-255. Dispenser
€508.95
Add to Wish List Add to Compare

Ultimus V dispensing controller 0 to 6.9 bar with RS232 interface - Nordson EFD 7012590
€8,301.00
Add to Wish List Add to Compare

Ultimus V precision dispenser pre-calibrated, 0 to 7 bar, 400 memory locations - Nordson EFD 7012589
€9,434.38
Add to Wish List Add to Compare

OKI DX-350. Dispenser
€773.03
Add to Wish List Add to Compare

OKI DX-9010. Finger switch for DX series
€209.24
Add to Wish List Add to Compare

EPDM O-ring for piston, TA cartridge system - Nordson EFD 7702687
€0.26

What are dosing devices and what industrial applications require precision fluid dispensing equipment?

Dosing devices are precision pneumatic and hydraulic instruments that control the exact quantity and timing of fluid dispensation in industrial processes. These systems are essential in automotive assembly for adhesive and sealant application, electronics manufacturing for conformal coating and potting compounds, pharmaceutical production for exact volume dispensing, and aerospace component bonding where material waste must be minimized. The Nordson EFD Ultimus series offers timing precision from 0.0001 to 999.9 seconds, enabling repeatable dispensing cycles for high-volume production lines where consistency directly impacts product quality and regulatory compliance.

What technical specifications should engineers consider when selecting pneumatic dosing equipment for industrial applications?

Critical selection parameters include operating pressure range, timing resolution, media viscosity compatibility, and dispensing volume accuracy. The Nordson EFD Performus-X100 operates at 0-7 bar pressure range while the X15 model handles lower pressures of 0-1 bar, making pressure matching essential for proper system integration. Timing precision varies significantly between models, with the UltimusPlus series offering 0.0001-99.9 second resolution compared to basic analog systems without digital timing control. Viscosity handling capability determines whether low-viscosity solvents or high-viscosity adhesives can be processed, while dispensing volume repeatability typically ranges from ±1% to ±5% depending on system configuration and calibration.

Which international standards and certifications apply to industrial dosing equipment in European manufacturing facilities?

Industrial dosing systems must comply with EN 60204-1 for electrical safety in machinery, ISO 9001 quality management requirements for manufacturing processes, and ATEX 2014/34/EU directive when handling flammable or explosive materials in hazardous environments. Pneumatic components require compliance with ISO 4414 compressed air system standards, while hydraulic dosing equipment follows ISO 4413 specifications for fluid power systems. Food-grade and pharmaceutical applications demand FDA 21 CFR Part 177 material compliance for wetted components, and medical device manufacturing requires ISO 13485 quality system certification. ESD-safe variants must meet IEC 61340-5-1 standards for electrostatic discharge protection in electronics assembly environments.

How do analog and digital dosing systems differ in functionality and which applications benefit from each type?

Analog dosing systems like the Nordson EFD Performus-I provide continuous pressure regulation without timing control, making them suitable for manual dispensing operations where operators control start and stop functions. Digital systems such as the Ultimus series offer programmable timing cycles from 0.0001 seconds with precise repeatability, essential for automated production lines requiring consistent dispensing volumes. The UltimusPlus II provides enhanced timing range compared to the standard Ultimus I model, while 2K dosing systems like the EQUALIZER handle dual-component materials with precise mixing ratios. Vacuum-assisted systems prevent dripping and material waste between dispensing cycles, crucial for expensive materials or clean-room environments where contamination must be eliminated.

What installation requirements and system compatibility factors must be considered for pneumatic dosing equipment?

Dosing systems require clean, dry compressed air supply at 90-120 psi with ISO 8573-1 Class 2 filtration standards to prevent contamination and ensure valve longevity. Electrical connections typically use 24V DC or 110/230V AC power supplies with standard industrial connectors compatible with PLC control systems through discrete I/O or fieldbus communication protocols. Mounting configurations include benchtop units for manual operations, panel-mount systems for integration into automated equipment, and rack-mount versions for multi-head dispensing stations. Cartridge handling systems accommodate standard 30cc, 55cc, and 310ml cartridge sizes with quick-change mechanisms, while bulk material systems require appropriate supply tank pressurization and material feed line sizing based on viscosity and dispensing distance requirements.

What safety ratings and environmental operating specifications apply to industrial dosing equipment?

Industrial dosing systems typically operate within temperature ranges of 10°C to 50°C ambient conditions with storage capabilities from -20°C to 70°C for stable performance across varying environmental conditions. Pressure ratings vary from low-pressure systems handling 0-1 bar for delicate applications to high-pressure variants operating up to 7 bar for viscous materials and long dispensing lines. IP40 to IP65 ingress protection ratings ensure reliable operation in dusty workshop environments, while specialized cleanroom versions meet ISO 14644 Class 100 to Class 10,000 particle contamination standards. ATEX-certified models provide intrinsic safety for Zone 1 and Zone 2 hazardous areas when dispensing flammable solvents or working near ignition sources, with surface temperature limitations preventing material degradation or safety hazards.

What maintenance procedures and service intervals are required for pneumatic dosing equipment to ensure reliable operation?

Preventive maintenance includes daily air filter inspection and weekly compressed air moisture checks to prevent contamination-related valve failures and dispensing inconsistencies. Dispensing valve seals require replacement every 500,000 to 2 million cycles depending on material abrasiveness and operating pressure, while pneumatic actuator components need annual lubrication and seal inspection for optimal performance. Calibration verification should occur monthly using precision scales to confirm dispensing volume accuracy within ±2% tolerance, with full system recalibration performed annually or after any major component replacement. Filter elements in compressed air lines require quarterly replacement or when pressure differential exceeds 0.5 bar, and material supply lines need flushing between different material types to prevent cross-contamination and chemical incompatibility issues that could damage wetted components.

Dosing devices

Technical features

Dispensing device product overview

Reeco RE-1900

Typical applications