Solder fume extraction unit tip extraction for 8 stations, HEPA and gas filter - Oki BTX-208

With eight hand soldering benches in one room, general ventilation is not enough to keep solder fume out of the breathing zone. The BTX-208 is a tip extraction system with a high vacuum blower motor that draws fume straight from the tip of every iron and serves up to eight workstations.

Benefits

• Capture directly at the tip of each iron instead of in the breathing zone
• Capacity for up to 8 workstations from a single unit
• Main filter with 99.97 % efficiency at 0.3 microns plus an activated carbon stage for gases
• Pre-filter and main filter changed independently, which cuts running cost
• Plug-and-play duct system and universal hose connection kit for fast installation
• Universal power supply for 100-240 V at 50 or 60 Hz, designed for under-bench installation

Technical data

Applications

Electronics manufacturing and repair shops with several hand soldering benches, training rooms and laboratories, test areas, and any place where rosin and flux fume has to be removed close to the source.

Compatibility and scope of delivery

The unit connects to the tip extraction fittings of the benches through the plug-and-play duct system and is designed for installation under the bench. Delivery includes the BTX-208 unit, a filter set of pre-filter and main filter, the ventilation cover and the 32 mil threaded connection.