ESD extraction arm Omniflex 63 mm 140 m3/h with conical nozzle - Oki EA1124

Solder fume has to be captured where it is generated, otherwise it drifts past the operator. The EA1124 Omniflex arm with 63 mm diameter and conical nozzle handles up to 140 m3/h and can be positioned precisely over the joint thanks to its ball-and-socket joints.

Benefits

• Airflow up to 140 m3/h (85 cfm), depending on the nozzle fitted
• Ball-and-socket joints hold every set position without readjustment
• Working length 0.6 m, extendable in 300 mm steps with Omniflex extensions
• Fully conductive material, therefore ESD safe at protected workstations
• Larger 63 mm cross section for higher air volumes and capture from a greater distance

Technical data

Applications

Capture of solder fume, flux vapour and aerosols at hand soldering benches, rework stations and small-batch electronics production.

Compatibility and scope of delivery

Fits Omniflex systems with a 63 mm connection. Extensions of 300 mm are available separately, as are connecting hoses with 63 mm diameter. Scope of delivery: one extraction arm with conical nozzle.

The fully conductive design supports use in EPA areas in line with IEC 61340-5-1.