The product may differ from the illustration
A desoldering tip that is too wide never builds up suction and leaves solder in the barrel. The T80DT003 has a 0.8 mm inner diameter and a 13 mm tip length, sized for thin component leads in tight through-hole patterns. It mounts on the DS-GUN-2 desoldering gun and works between 420 and 475 °C.
Desoldering tip inner diameter 0.8 mm T80 series - Thermaltronics T80DT003
THERMALTRONICS Original product
Net price (excl. VAT)
€17.77
Item WL38377
Manufacturer no. T80DT003
Personal expert advice
Brand new Specialist dealer since 2009 Original product Worldwide shipping
Product data
Manufacturer no.T80DT003
ConditionNew
Article
WL38377
Frequently Bought Together
- This Item: €17.77
- Tweezer soldering tip pair chisel 30° 1.78 mm T series - Thermaltronics T80TZ018B €27.92
- Soldering tip chisel 3.2 mm 90 degrees T series - Thermaltronics T70CH032 €13.25
Total price
Desoldering is about the ratio between lead and channel. With a 0.8 mm inner diameter the T80DT003 cartridge closes tightly around thin leads, so the vacuum pump pulls the molten solder completely out of the plated hole.
Benefits
- 0.8 mm (0.03 in) inner diameter for fine leads and small plated through-holes
- 13 mm tip length as the standard reach for open, accessible joints
- Heater and sensor inside the cartridge for a fast rise back to temperature
- Self-regulating 420-475 °C range, no calibration required
- RoHS compliant and suitable for lead-free solder
Technical data
| Item number | WL38377 |
| Model | T80DT003 |
| Manufacturer | Thermaltronics |
| Manufacturer item number | T80DT003 |
| Product series | T desoldering tip series, 420-475 °C |
| Tip type | desoldering tip |
| Inner diameter | 0.8 mm (0.03 in) |
| Tip length | 13 mm (0.51 in) |
| Temperature range | 420-475 °C |
| Matching hand piece | DS-GUN-2 |
| Dimensions incl. packaging (LxWxH) | 175 mm x 19 mm x 19 mm (6.9 in x 0.7 in x 0.7 in) |
| Weight | 0.1 kg |
| Order unit | piece |
| Version | RoHS compliant, lead-free |
Applications
Removing through-hole components with slim leads, repairing plated holes and clearing pads before a board is repopulated.
Compatibility and scope of delivery
For the DS-GUN-2 desoldering gun on the TMT-5000S-1 and TMT-5000S-2 stations. Scope of delivery: one T80DT003 desoldering cartridge.
| Manufacturer Nr. | T80DT003 |
|---|---|
| Manufacturer | Thermaltronics |
| Weight | 0.100000 |
| GPSR manufacturer information | AMS Ltd, Unit 3 Norse Trade Park, Congleton CW12 1GW, www.ams-electronics.co.uk |
| Article authenticity | Original product |
| Condition of article | New |
Write Your Own Review
Customers Who Bought This Item Also Bought
