PUR ESD Foam ELHart Conductive Black 300 x 300 x 10 mm - A1-ESD EP0705154

Anyone buffering or shipping populated assemblies in containers needs an insert that holds the parts and stays conductive itself. This PUR foam from the ELHart line sits at 10E3 to 10E4 ohm in the conductive range and comes cut to 300 x 300 mm at 10 mm thickness, ready to drop into ESD cartons and containers.

Benefits

• Conductive at 10E3 to 10E4 ohm, charges drain through the foam instead of staying on the part.
• Hard grade, the sheet keeps its shape and does not collapse under stacked assemblies.
• 10 mm thickness, enough material to cut pockets and cutouts into.
• Sheet size 300 x 300 mm, suitable as a base or intermediate layer in containers of this footprint.
• Black throughout, the conductive insert is easy to tell apart from ordinary packaging foam at the workplace.
• PUR foam can be reworked with a sharp knife, so contours need no tooling cost.

Technical data

Application

Typical uses are inserts in ESD cartons and storage containers for moving populated boards between workplaces, holding single components in compartments, and cushioning sensitive assemblies inside the EPA. Because the foam is conductive, charge separation on removal stays low.

Note on the line

This item is the 10 mm version. The ELHart line is also offered with 6 mm.