Treston ESD workstation systems

3D Configurator

Concept, TP & TPH Accessories & lighting EN 61340-5-1

Did you know?

Bench height follows standing elbow height, not a nominal table height. For fine assembly the surface sits some 5 to 10 cm above it.

Browse industrial chairs

Treston workbenches

Electric workbenches QuatreX

QuatreX is Treston's electrically height-adjustable workbench line: 4-leg frames in widths from 1025 to 2025 mm and depths of 750 or 900 mm, each rated for 300 kg. QX frames are supplied without a worktop. The TT worktops are ordered separately in ESD (dissipative laminate), HPL (high-pressure laminate) or LPL (low-pressure laminate) from 1030 to 2030 mm wide, and they also fit Concept Ergo frames. For an ESD workstation, add the ESD grounding kit, ESD aluminium upright profile sets and side protection panels.

Find the right component

Filter by ESD version or move on to related Treston ranges.

ESD componentsDissipative laminate worktops, grounding kit, upright profile sets and side panels for the EPA.dissipative Frames and standard worktopsElectric 4-leg frames, HPL and LPL worktops and the waste and recycling bin.up to 300 kg Concept ErgoHeight-adjustable frames that take the same TT worktops.same worktops AccessoriesFurther add-ons for Treston workstations.

47 items
1 manufacturer
Net prices plus VAT

View as Grid view List view

Show

per page

Buying guide

How to choose Electric workbenches QuatreX

What matters when choosing: properties, comparison and typical applications.

Selection criteria

QX frame (WxD)	Matching TT worktop	ESD upright profile set (WxH)	Height adjustment	Load capacity
1025x750 / 1025x900 mm	1030x750 / 1030x900 mm	-	electric	300 kg
1225x750 / 1225x900 mm	1230x750 / 1230x900 mm	1060x1200 mm (AL2X110QX)	electric	300 kg
1525x750 / 1525x900 mm	1530x750 / 1530x900 mm	1489x1200 mm (AL2X150QX)	electric	300 kg
1825x750 / 1825x900 mm	1836x750 / 1836x900 mm	1789x1200 mm (AL2X180QX)	electric	300 kg
2025x750 / 2025x900 mm	2030x750 / 2030x900 mm	-	electric	300 kg

Worktop	Surface	Use
TT...-ESD	dissipative laminate, 25 mm	ESD workstations, together with the QX-ESD grounding kit
TT...-HPL	high-pressure laminate, light grey	assembly and workshop without ESD requirements
TT...-LPL	low-pressure laminate, light grey	workstations without ESD requirements

FAQ

Frequently asked questions about Electric workbenches QuatreX

Is the worktop included with the QuatreX frame?

No. QX frames are supplied without a worktop. Order the matching TT worktop separately, for example the 1230x750 mm top for the 1225x750 mm frame.

Which worktop is suitable for ESD workstations?

For ESD workstations, choose the TT...-ESD version with dissipative laminate. Ground the frame with the QX-ESD grounding kit. HPL and LPL worktops are not ESD versions.

Do the worktops also fit Concept Ergo?

Yes. TT worktops are designed for both QuatreX and Concept Ergo, so you can use the same worktop size on either frame line.

How much load does a QuatreX frame carry?

All QuatreX 4-leg frames are electrically height-adjustable and rated for 300 kg, regardless of width and depth.

Which sizes are available for frames and worktops?

QuatreX frames come in widths of 1025, 1225, 1525, 1825 and 2025 mm, each with 750 or 900 mm depth. TT worktops are 25 mm thick, light grey and 1030, 1230, 1530, 1836 or 2030 mm wide, also with 750 or 900 mm depth.

Which accessories are available specifically for QuatreX?

ESD aluminium upright profile sets with a height of 1200 mm, ESD side protection panels for 750 and 900 mm depth, and a 60-litre waste and recycling bin.