Workplace lighting
Signal and status lights
The signal and status lights in this category belong to the SIGNALED II range from LED2WORK. The RGB version reports the machine state in freely selectable colours, while the RGB-W version adds white LEDs and lights the work area at the same time. Every light shares the same basis: surface mounting, 24 V DC, protection rating IP54, a 120° beam angle and stepless dimming. They differ in length from 180 to 1520 mm, in luminous flux from 34 to 6900 lm and in power input from 2.8 to 96 W.
Quick selection
The defining features of this category as a direct filter.
LED2WORKThe SIGNALED II range in the RGB and RGB-W versions.SIGNALED II range
IP54Protected against dust and splashing water.IP54 throughout
24 V DCWired into the extra-low voltage level of the machine.
DimmableBrightness set steplessly from the machine control system.dimmable throughout
Surface mountedFitted to a profile, housing or machine panel.length 180 to 1520 mm
120° beam angleWide beam for an even distribution of light.
34 to 91 lmDiscreet status indication on a cell or cabinet.
2300 to 6900 lmStrong versions that also light the work area.
- 14 items
- 1 manufacturer
- Net prices plus VAT
Buying guide
How to choose Signal and status lights
What matters when choosing: properties, comparison and typical applications.
Selection criteria
| Criterion | What to check | Available here |
|---|---|---|
| Version | RGB signals only, RGB-W signals and illuminates with additional white LEDs. | RGB and RGB-W of the SIGNALED II range |
| Length | A short light is enough for status indication, a long one matches the width of the work area. | 180, 260, 350, 520, 760, 1020 and 1520 mm |
| Luminous flux | Pure signalling needs little light, illuminating the work area needs considerably more. | 34 to 6900 lm, graded by length |
| Power input | Size the power supply and the cable cross-section accordingly. | 2.8 to 96 W, one value per length and version |
| Protection and mounting | Surface mounting on a profile or housing, protection rating to suit the surroundings. | Surface mounted and rated IP54 throughout |
| Control | Colour and brightness come from the machine control system. | Dimmable throughout, 120° beam angle |
| Supply | The lights are tied into the extra-low voltage level of the installation. | 24 V DC across the range |