Fume Extractions
Hoses and connectors
This category covers the hoses, flanges, reducers, hose connectors and clamps that link the fume extractor, the extraction arm and the capture nozzle of a solder fume extraction system. Most parts come from Donaldson Bofa, ULT, Weller, Alsident and Oki, complemented by Ersa, Quick and JBC. They differ in nominal size from DN 50 to DN 200, in material (antistatic, dissipative PP, silicone, PE) and in connection system, such as Weller Easy-Click 60.
Find the right part quickly
Filter this category by manufacturer or ESD property. The diameter at the unit or extraction arm remains the deciding factor.
Donaldson BofaHose sets, reducers, clamps and ESD silicone tubing.Cobra Clip 75 mm
ULTAntistatic extraction hoses by the metre or with end piece.DN 50 to DN 200
WellerHose connectors and extraction hoses for WFE and Zero Smog units.Easy-Click 60
AlsidentPolypropylene flanges for extraction cabinets and consoles.Flanges 50 to 160 mm
OkiConnecting hoses and adapters for Omniflex and BVX systems.Ø 32 and 63 mm
Ersa and JBCNozzle coupling for EASY ARM and ESD hose for modular stands.Omniflex coupling
QuickHeat-resistant extraction hoses with connections on both ends.75 mm connection
ESD (antistatic)Only antistatic and dissipative parts for use inside the EPA.IEC 61340-5-1
- 143 items
- 8 manufacturers
- Net prices plus VAT
Buying guide
How to choose Hoses and connectors
What matters when choosing: properties, comparison and typical applications.
Selection criteria
| Criterion | What to check | Example from the range |
|---|---|---|
| Nominal size | Hose, flange and unit spigot need the same diameter. Use a reducer where the nominal size changes. | Reducer 125 mm to 75 mm (Donaldson Bofa A1080113) |
| ESD property | Inside an ESD protected area choose antistatic or dissipative versions so the air path does not build up charge. | Extraction hose DN125 antistatic (ULT 06.1.027), ESD flange DN50 in dissipative PP (Alsident 4-50-13-2-6) |
| Connection system | Note manufacturer-specific plug systems, otherwise the hose will not fit without an adapter. | Easy-Click 60 hose connector (Weller T0058762768), Omniflex nozzle coupling (Ersa 0CA10-9006) |
| Length and assembly | Hose by the metre can be cut to the duct length, ready-made lengths with end piece save fitting time. | Extraction hose DN50 antistatic 5 m with end piece (ULT 06.1.016), connecting hose 7.5 m Ø 32 mm (Oki CH0123) |
| Temperature and fire behaviour | Near hot processes use heat-resistant or flame-retardant parts. | Heat-resistant extraction hose 75 mm, 2 m (Quick KCN75-75-2M), HT end piece DN 50 (ULT 06.1.010) |
| Fastening | Secure joints with clamps or cuffs so that no leakage air is drawn in. | Cobra Clip hose clamp 75 mm (Bofa A1080017) |