ESD Rework System with Soldering, Electric Desoldering and 700 W Hot Air, 230 V - JBC RMSE-2QG

The JBC RMSE-2QG brings together every tool a rework bench needs for soldering, desoldering and hot air work on printed circuit boards. The soldering iron, electric desoldering iron with vacuum pump and power hot air station run at the same time and share a compact, stackable layout.

Benefits

• DDE-2C control unit drives two tools simultaneously with up to 150 W per tool.
• T245-A soldering iron with the efficient JBC heating system for fast warm-up and stable tip temperature (±1.5 °C at idle).
• DR560-A desoldering iron with the electric MSE-B pump for clean, continuous solder removal without compressed air.
• JTSE-2B hot air station rated at 700 W for SMD components and larger joints.
• Sleep and Hibernation modes extend tip life and cut energy use.

Technical data

• Hot air power: 700 W
• Power per soldering/desoldering tool: up to 150 W
• Temperature range: 90-450 °C (190-840 °F)
• Supply voltage: 230 V
• Tip to ground resistance: < 2 ohm
• Tip to ground voltage: < 2 mV RMS
• Dimensions: 700 x 410 x 390 mm
• Net weight: 14.83 kg

Applications

Suited to repair, rework and small-batch assembly in electronics production, labs and service, covering both SMD and through-hole components.

What is in the box

• DDE-2C 2-tool control unit
• JTSE-2B power hot air station
• MSE-B electric desoldering module
• T245-A soldering iron
• DR560-A desoldering iron
• AD-SF and DR-SF stands
• Instruction manual

Soldering tips (C245 series) and desoldering nozzles (C560 series) are not included and are ordered separately.

Standards

ESD-safe to IEC 61340-5-1, CE, RoHS. Made in Spain.