Nano soldering and desoldering station 14 W per tool, 90 to 450 °C, with 2x NT115 for C115 - JBC NANE-2D

Under the microscope it is hand position that decides the result, not the wattage. The NANE-2D provides two NT115 nano handles at 14 W each and controls 90 to 450 °C within ±3 %, so nothing overheats on 0201 parts.

Benefits in use

• The cartridge type decides compatibility. Both tools work exclusively with the C115 cartridge range.
• 14 W peak power per tool and a temperature range from 90 to 450 °C with ±3 % accuracy.
• Intelligent heat management with sleep and hibernation modes extends cartridge life fivefold.
• Resistance between tip and earth below 2 Ohm, voltage below 2 mV RMS, plus equipotential bonding to the EPA.
• A complete cleaning system with wiper and brush and the exclusive JBC cartridge changer are integrated.
• The JBC fume extraction connects over RJ12, USB-A carries firmware and profiles, USB-B goes to the PC, one pedal connection per tool.
• Two NT115 nano handles are included, together with the HPTE0C9SA ESD tweezers with epoxy coating.

Applications

Soldering and rework of the smallest SMD parts under the microscope, laboratory use, sample work and repair benches with high traceability requirements, since data can be read out over USB.

Compatibility and scope of delivery

• Two NT115 nano handles for cartridges of the C115 range
• HPTE0C9SA high precision tweezers with ESD epoxy coating
• JBC cartridge holder and cartridge changer
• C115 cartridges are not part of the delivery

Standards and compliance

ESD-safe to ANSI/ESD S20.20 with equipotential bonding to the EPA, resistance between tip and earth below 2 Ohm. Operating voltage 230 V.