Images are examples, some edited with AI. The technical data are authoritative. AI notice
Pressure Sensor SPAN-B2R-M5F-PNLK-PNVBA-L1 - Festo 8035540
Festo sensor for reliable monitoring of position, pressure or status in the pneumatic system.
Net
excl. VAT
€109.08
Item
FES-8035540
Manufacturer no.
SPAN-B2R-M5F-PNLK-PNVBA-L1
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Festo sensor for reliable monitoring of position, pressure or status in the pneumatic system. The key technical data of this genuine Festo article are listed below.
Technical data
| Permission | RCM mark<br>c UL us - Listed (OL) |
|---|---|
| CE certificate (see declaration of conformity) | acc. to EU-EMV Directive<br>acc. to EU-RoHS Directive |
| KC-mark | KC-EMV |
| Certified awarding point | UL E322346 |
| Material information | RoHs compliant |
| Measured parameter | Relative pressure |
| Measurement process | Piezoresistive pressure sensor |
| Druckmessbereich Anfangswert (MPa) [MPa] | -0,1 |
| Pressure measurement range starting value [bar] | -1 |
| Druckmessbereich Anfangswert (psi) [psi] | -14,5 |
| Druckmessbereich Endwert (MPa) [MPa] | 0,1 |
| Pressure measurement range end value [bar] | 1 |
| Druckmessbereich Endwert (psi) [psi] | 14,5 |
| Overload range [bar] | 5 |
| Overload pressure [MPa] | 0,5 |
| Überlastdruck (psi) [psi] | 72,5 |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4]<br>Inert gases |
| Information about operating and control medium | Oiled operation possible |
| Medium temperature [°C] | 0 to 50 |
| ambient temperature [°C] | 0 to 50 |
| Accuracy FS [%FS] | 1,5 |
| Repeatability in ± %FS [%FS] | 0,3 |
| Temperature coefficient in ± %FS/K [%FS/K] | 0,05 |
| Control output | 2 x PNP or 2 x NPN switchable |
| Switch function | Window comparator<br>Threshold comparator<br>Auto difference monitoring |
| Switching element function | Opener/closer switchable |
| Max. output current [mA] | 100 |
| Analogue output | 1 - 5 V<br>0 - 10 V<br>4 - 20 mA |
| Max. load resistance current output [Ohm] | 500 |
| Min. load resistance voltage output [kOhm] | 20 |
| Short circuit resistance | yes |
| Report | IO-Link |
| IO-Link, report | Device V 1.1 |
| IO-Link, profile | Smart sensor profile |
| IO-Link, function classes | Teach channel<br>Diagnosis<br>Identification<br>Binary data channel (BDC)<br>Process data variables (PDV) |
| IO-Link, communication mode | COM2 (38.4 kBaud) |
| IO-Link, SIO mode support | yes |
| IO-Link, port type | A |
| IO-Link, process data width OUT | 0 Bytes |
| IO-Link, process data width IN | 2 Bytes |
| IO-Link, process data contents IN | 14 bit PDV (pressure measurement)<br>2 bit BDC (pressure monitoring) |
| IO-Link, minimum cycle time | 3 ms |
| IO-Link, data memory needed [Byte] | 500 |
| Operating voltage range DC [V] | 15 to 30 |
| Reverse polarity protection | for all electrical connections |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connection technology | Wiring diagram L1J |
| Electrical connection 1, number of pins / wires | 4 |
| Fastening type | Front panel integration<br>With Wall / flat holder |
| installation position | arbitrary |
| Pneumatic connection | female thread M5 |
| Product weight [g] | 34 |
| Housing material | PA reinforced |
| From medium contacting materials | FPM<br>NBR<br>PA-verstärkt<br>Messing, vernickelt |
| Display type | Illuminating LCD |
| Presentable unit(s) | MPa<br>bar<br>inchH2O<br>inchHg<br>kPa<br>kgf/cm²<br>mbar<br>mmHg<br>psi |
| Setting options | IO-Link<br>Teach-In<br>über Display und Tasten |
| Tamper-proof fuse | IO-Link<br>PIN code |
| Settings range threshold value [%] | 0 to 100 |
| Settings range hysteresis [%] | 0 to 90 |
| Protection category | IP40 |
| Corrosion resistant class KBK | 2 - moderate corrosion stress |
| Weight | 0.039 kg |
| Manufacturer | Festo |
| Manufacturer Nr. | SPAN-B2R-M5F-PNLK-PNVBA-L1 |
| EAN | 4052568284800 |
| HS-Code | 90262020 |
| GPSR manufacturer information | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Condition of article | New |
| Article authenticity | Original product |
| Material | Polyamide (PA) |
| Gewinde | M5 |
| Medium | Compressed air, neutral gases |
| Corrosion resistance class CRC | 2 - moderate corrosion stress |
| Mounting position | arbitrary |
| Operating conditions | ISO 8573-1 |
| Series | SPAN |
| Protection class (IP) | IP40 |
| Temperature (max.) | 50 |
Downloads
Accessories
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
