Receiver signal clamp 4 inch for cable identification - Leica ULTRA

Where several cables share the same route, a reading taken above ground is no longer enough to name one of them with confidence. The receiver signal clamp with a 4 inch opening runs on the Leica ULTRA receiver and is closed around each cable in turn until the receiver reports the injected signal.

Benefits

• Positive identification instead of assumption, the clamp measures on the individual cable and not across the whole bundle.
• 4 inch opening, sized for the cable diameters usually met in chambers and cable basements.
• Works with the receiver already in the kit, the Leica ULTRA receiver stays the display unit, no additional instrument is needed.
• No cutting to test, the cable is enclosed and stays in service throughout.
• Original accessory with EAN 7640180530398, with the matching interface for the ULTRA receiver.

Technical data

Applications

Cable identification before cutting in a chamber, assigning outgoing circuits in distribution boards and substations, checks after re-routing, proving the correct line before switching operations and repairs.

Compatibility and scope of delivery

The manufacturer assigns the clamp to the Leica ULTRA receiver. A signal transmitter of the ULTRA range is needed to inject the signal, the clamp itself generates none. It is not to be confused with signal clamps 818704 and 818705, which work on the transmitter. The receiver clamp is supplied on its own.

Origin

Original accessory from Leica Geosystems, material number 842434, EAN 7640180530398, customs code 8536309090, country of origin United States.