Clamp-on Sonde 33 kHz for 12 mm Duct Rods and Camera Cables, 5 m Depth - Leica Clamp Sonde 33

During a sewer inspection the camera picture shows the defect but not where it sits above ground. The Clamp Sonde 33 closes that gap by clamping directly onto the camera cable or onto a 12 mm duct rod. It transmits at 33 kHz, the DD locator detects it down to 5 m, and the position can be marked on the surface straight away.

Benefits

• Clamp fixing instead of a thread: the sonde goes exactly where it is needed, even mid cable, without removing the camera head.
• Suits 12 mm duct rods: the clamp is matched to the common rod diameter and holds while pushing and pulling back.
• 5 m depth range: covers the usual laying depths of underground drains and service connections.
• 33 kHz frequency: the standard sonde frequency of the DD locators, with no extra changeover at the instrument.
• Very light at 0.180 kg shipping weight: the sonde slows neither the camera feed nor the handling of the rod.

Applications

Pinpointing the camera head during sewer inspection, marking defects and blockages on the surface, following the duct route while the rod is pushed in, preparing precise excavations, recording connection sewers.

Compatibility and scope of delivery

The manufacturer specifies clamping onto 12 mm duct rods or onto the cable of a sewer inspection camera, with readout by a DD locator in sonde mode. The sonde is supplied with the battery fitted, no further accessories are listed.

Standards and origin

Made in Great Britain, customs code 9015802000, EAN 7640110697351. Shipping weight 0.180 kg, packaging size 16 x 5 x 5 cm. The product contains a battery, so the relevant transport rules apply to shipping.