Function Upgrade Semi-Automatic Single Axis Grade up to 8 Percent for Rugby CLH - Leica CLX 300

Dialling in a fall by hand costs time and has to be repeated at every set-up. With the CLX 300 function upgrade the target value is entered directly on the Rugby CLH and the laser sets the grade in one axis semi-automatically, within an 8 percent range.

Benefits

• Semi-automatic grade in one axis with an 8 percent range, the target value is entered rather than adjusted by trial, which shortens every set-up.
• Direct value entry keeps the fall traceable and repeatable, even when the instrument is moved during the job.
• Includes the CLX 200 stage, so manual grade, slope catch and slope lock are available on top.
• Permanent activation with no term, the function stays with the instrument for its whole service life.
• No instrument swap needed, the existing Rugby CLH base unit takes over the grade work.

Technical data

Applications

Road and path construction with a specified longitudinal fall. Drainage runs and channels where the fall has to be held exactly. Hall floors and outdoor areas with a defined slope towards the drain. Earthworks and excavation holding a target grade across larger areas.

Compatibility and scope of delivery

The upgrade is intended for the Leica Rugby CLH rotating laser and requires an existing base instrument. The delivery consists of:

• 1 x CLX 200, manual grade, permanent, material number 864865
• 1 x CLX 300, semi-automatic single axis grade, permanent, material number 864866

Origin and identification

Original Leica Geosystems function extension, material number 6012289. The Rugby CLH rotating laser is not included in the delivery.