Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
Festo rotary actuator for defined swivel motion and positioning in automation.
Semi-Rotary Drive DSMI-40-270-A-B - Festo 561691
FESTO Original product
Net price (excl. VAT)
€1,243.87
Item FES-561691
Manufacturer no. DSMI-40-270-A-B
Personal expert advice
Brand new Specialist dealer since 2009 Original product Worldwide shipping
Product data
Manufacturer no.DSMI-40-270-A-B
EAN4052568208868
Customs tariff number84123900
ConditionNew
Article
FES-561691
Frequently Bought Together
- This Item: €1,243.87
- Connecting Cable KVI-CP-3-WS-WD-2 - Festo 540329 €58.68
- Displacement Encoder MLO-POT-300-TLF - Festo 152626 €408.48
Total price
Festo rotary actuator for defined swivel motion and positioning in automation. The key technical data of this genuine Festo article are listed below.
| Settings range swivel angle [deg] | 0 to 270 |
| Stroke reduction at the end positions | 5 ° |
| Smallest positioning stroke | 15° for soft stop<br>5° during positioning |
| Piston diameter | 40 mm |
| Swivel angle [deg] | 0 to 272 |
| Dampening | P: Elastic silencer rings / plates double-sided |
| Position the integration location | arbitrary |
| Integration position soft stop | horizontal |
| Measurement principle travel measurement system | Analogue |
| Construction set up | Drive shaft ball bearing mounted<br>Rotary vane |
| Position detection | With Angle measurement system integrated<br>For proximity switch |
| Operating pressure positioning / soft stop [bar] | 4 to 8 |
| Max. swivel frequency at 6 bar [Hz] | 2 |
| Max. movement speed [deg/s] | 2.000 |
| Min. movement speed [deg/s] | 50 |
| Typical positioning time short stroke, horizontal | 0,25/0,25 s |
| Typical positioning time long stroke, horizontal | 0,30/0,55 s |
| Connection resistance [kOhm] | 5 |
| Recommended grinder current [µA] | < 1 µA |
| Principle of operation | double acting |
| Max. operating voltage DC [V] | 42 |
| Max. grinder current short term [µA] | 10.000 |
| Max. power input [mA] | 4 |
| Nominal operating voltage DC [V] | 10 |
| Tolerance connection resistance [%] | 20 |
| Permitted voltage oscillations | < 1 % |
| CE certificate (see declaration of conformity) | to EU EMC directive |
| Operating medium | Compressed air to ISO 8573-1:2010 [6:4:4] |
| Information about operating and control medium | Oiled operation not possible |
| Continuous impact strength DIN&EC 68 parts 2-82 | Tested to severity class 2 |
| Corrosion resistant class KBK | 0 - No corrosion stressing |
| Protection category | IP65<br>acc. to IEC 60529 |
| Oscillation strength to DIN/IEC 68 part 2-6 | Tested to severity class 2 |
| ambient temperature [°C] | -10 to 60 |
| Impact energy at the end positions [J] | 0,10 |
| Max. axial force [N] | 120 |
| Max. mass inertia, horizontal [kg/m²] | 0,12 |
| Max. mass inertia, vertical [kg/m²] | 0,12 |
| Max. radial force [N] | 350 |
| Min. mass moment of inertia, horizontal [kg/m²] | 0,0060 |
| Min. mass moment of inertia, vertical [kg/m²] | 0,0060 |
| Theoretical torque at 6 bar [Nm] | 20 |
| Product weight [g] | 3.950 |
| Resolution angle [deg] | <= 0,1 deg |
| output signal | Analogue |
| Independent linearity | 0,0025 |
| Repeatability positioning | ± 0,3 deg |
| Repeatability soft stop end position | < 0.2 deg |
| Repeatability soft stop intermediate position | ± 2 deg |
| Electrical connection: path measurement system | 4 pin |
| Cable length [MTR] | 30 |
| Fastening type | with female thread |
| Pneumatic connection | G1/8 |
| Housing measurement system material | Aluminium wrought alloy<br>anodized |
| Material information | Copper and PTFE-free |
| Stopper lever material | Aluminium wrought alloy<br>anodized |
| Drive shaft material | Nickel-<br>plated steel |
| Fixed limit stop material | Steel |
| Housing material | Aluminium wrought alloy<br>anodized |
| Measurement system coupling material | TPE-U(PU) |
| Feather key material | Steel |
| Rotary vane material | PET reinforced |
| Plug housing material | PA reinforced |
| Cylinder tube material | Aluminium wrought alloy |
| Manufacturer Nr. | DSMI-40-270-A-B |
|---|---|
| Manufacturer | Festo |
| EAN | 4052568208868 |
| Weight | 4.100000 |
| HS-Code | 84123900 |
| GPSR manufacturer information | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Article authenticity | Original product |
| Condition of article | New |
| Temperature (max.) | 60 |
| Werkstoff | Aluminium |
| Bohrung (mm) | 40.000000 |
| Pneumatischer Anschluss | G1/8 |
| Schutzart | IP65 |
| Betriebsspannung | 10 V DC |
| Medium | Druckluft |
| Funktion | doppeltwirkend |
| Corrosion resistance class CRC | 0 - No corrosion stressing |
| Design | Drive shaft ball bearing mounted, Rotary vane |
| Position sensing | Yes |
| Cushioning | P: Elastic silencer rings / plates double-sided |
Write Your Own Review
Customers Who Bought This Item Also Bought
Related Products
Check items to add to the cart or
