Conductive PU foam, self-adhesive, 250 x 350 mm, 6 mm thick - A1-ESD EP0705088

A thin dissipating layer is often enough to keep boards off bare plastic inside containers and drawers. This PU foam is kept flat at 6 mm and works in a conductive range of roughly 10E3 to 10E4 ohm.

Benefits

• Conductive setting of roughly 10E3 to 10E4 ohm, charge is drained instead of held at the part.
• Supplied cut to 250 x 350 mm, ready to use without cutting it to size on goods receipt.
• 6 mm thickness, flat enough for drawer and shallow container liners where every millimetre of height counts.
• Adhesive on one side, the liner stays fixed in the container or on the shelf.
• Open-cell polyurethane foam, it absorbs shocks during transport.
• Black throughout, so dust and abrasion do not show in a production environment.

Technical data

Application

Typical uses are base and interleaf layers in containers, drawers and assortment boxes, plus padding on shelves in the test area. The adhesive side keeps it in place even when parts are taken out and put back frequently.

Note on the range

The self-adhesive PU foam is offered in several cut sizes. This article is the 250 x 350 mm version at 6 mm thickness.