Aluminium Elevator Tripod 270 cm with Crank and mm Scale - Leica CET270

Suspended ceilings, ceiling outlets and high datum lines call for working heights a normal tripod cannot reach. The Leica CET270 gets to 270 cm on its cranked centre column, and the height is adjusted under load, so the instrument stays mounted on the head plate.

Benefits

• Crank column to 270 cm: covers ceiling work and high datum lines that would otherwise need a ladder and a standard tripod.
• Height adjustment under load: the laser stays up, fine height is trimmed on the crank instead of remounting the instrument.
• mm scale on the column: height changes can be read off and repeated exactly at the next station.
• Large head plate with 5/8 inch screw: surveying standard, takes rotating lasers, line lasers and levels.
• Fast clamps on the legs: coarse height in seconds, fine height on the crank.
• Exchangeable rubber feet: protect finished floors and can be replaced once worn.
• Carrying strap: the tripod moves to the next room on the shoulder.

Technical data

Applications

Drywall and suspended ceilings, overhead electrical and ventilation work, interior and shop fitting, set-up of rotating and line lasers in halls. Wherever the laser has to go beyond normal tripod height and the height is trimmed while work is running.

Compatibility and scope of delivery

The head plate with 5/8 inch screw fits rotating lasers, line lasers and levels to surveying standard, among them the automatic levels of the Leica NA series. Supplied with the CET270 elevator tripod, rubber feet and carrying strap. On smooth hall floors the Leica GST4 tripod star adds stability, and for plain levelling work the Leica CT160 and CTP104 aluminium tripods are the lighter alternatives.