Lower linear cutting wheel for Maestro 3-4M depaneling machines - Iteco 8930668

On depaneling machines with a linear support the scored panel rests on a fixed linear blade while the upper circular blade performs the separation. This spare part is the lower linear blade of the Maestro 3-4M and therefore a pure wear part that determines the cut over the whole length.

Operating features

• Clearly assigned to the Maestro 3-4M - the 2026 price list lists this item for that machine only, which rules out any mix up with the Tractor 2 blade.
• Fixed support over the full separation length - the blade carries the board, so its condition decides whether break edges stay straight and free of chip out.
• Wear part with a defined change interval - a blunt linear blade presses instead of separating and puts mechanical stress on components and solder joints near the border.
• No regrinding in the field - the cutting geometry is produced at the factory and is fully restored by replacing the blade.
• Matching upper part available - for the running edge Iteco lists the upper circular blade with bearing under 8930501 and in titanium under 8930509.

Applications

Scheduled replacement of the lower linear blade on the Maestro 3-4M, recovery of cut quality after chipped scored edges, and stock keeping of a critical wear part in shops that depanel continuously.

Compatibility and scope of supply

According to the Iteco price list 2026 this item belongs to the Maestro 3-4M. The Tractor 2 and Tractor 2M use the linear blade 1030005, and the Tractor SEP1 uses the lower circular blade 8930513. Supplied as one linear blade without tools and without a mounting kit. Made in Italy.