240 Degree Machine Receiver 200 m with Magnet Mount, Batteries and Case - Leica LMR240

For backhoe loaders and mini excavators a straightforward grade readout on the boom is usually enough, and that is what the Leica LMR240 was built for. It picks up the beam of any rotating laser across a 240 degree reception angle and within a 200 m radius, with a capture height of 15 cm. Fine mode reads to 6 mm and coarse mode to 30 mm. The unit ships with batteries, case and user manual.

Benefits

• 240 degree reception angle: the beam is caught over a wide sector, so the machine does not have to be swung towards the laser first.
• 15 cm capture height and 200 m radius: the laser is found quickly and the whole site is served from one set-up.
• Around 130 hours on 3 AA cells: standard alkaline batteries last for weeks and no charger is needed.
• Built-in magnet mount: rare earth magnets hold the receiver on the boom, and the release lever lets it be positioned before the magnets grip.
• Memory for the last signal: if the receiver loses the beam, LED arrows show which way to move the bucket to pick it up again.
• Three display settings: 3 channels in coarse mode and 3 or 5 channels in fine mode, matched to bulk digging or fine trimming.
• IP67 protection and -28 to +70 degrees Celsius: waterproof and rated for frost as well as summer heat.
• Automatic shut-off after 1 hour: forgetting to switch off costs no battery life.

Technical data

Applications

Backhoe loaders and mini excavators in bulk digging, trenching and foundation excavation, ground levelling in landscaping, checking dig depth by the operator alone without a second person on the staff.

Scope of delivery

• Leica LMR240 machine receiver with built-in magnet mount
• Batteries
• Carrying case
• User manual

Compatibility

The LMR240 works with any rotating laser, and range and achievable accuracy depend on the laser in use. If a readout inside the cab or full 360 degree reception is required, Leica covers that with the LMR360R machine receiver and the LMD360R remote display.

Standards and origin

IP67 protection, waterproof and rugged housing, operating temperature -28 to +70 degrees Celsius. Original Leica Geosystems instrument, material number 773569. EAN 7640110693049, customs code 9015900000, country of origin Hungary. The delivery contains batteries.