360 Degree Machine Receiver 200 m with Magnetic Bracket and Case 868 MHz - Leica LMR360R

Whether the invert is right is decided at the dipper stick. The Leica LMR360R picks up the beam of any rotating laser through a full 360 degrees, so the operator never has to swing the machine towards the laser first. The 25 cm capture window catches the beam within a 200 m operating radius and reports the grade to 6 mm in fine mode. This model is supplied with magnetic bracket and case and works on 868 MHz, the European SRD radio band.

Benefits

• 360 degree reception: the beam is caught from any machine position, so turning the excavator towards the laser is no longer needed.
• 25 cm capture window: the beam is found quickly and stays inside the window even while the stick is moving.
• 6 mm fine and 12 mm coarse: fine grading and bulk excavation each get the right tolerance band, with 9 display channels in fine mode and 7 in coarse mode.
• Vertical indicator ± 5 degrees: it watches the plumb of the dipper stick, because only a plumb stick gives a reliable depth reading and prevents over- or under-cutting.
• 30 hours of battery life: the rechargeable NiMH pack covers several shifts and refills in 12 hours, and the charger is included.
• IP67 protection: waterproof housing with built-in shock mounts that keep machine vibration away from the sensor.
• Two receiver channels: when two systems run on the same site, the receiver switches to the second frequency.
• Magnetic bracket included: large magnets set the receiver in place in seconds and let it move from machine to machine without tools.

Technical data

Applications

Excavation and trenching with the excavator, fine grading with dozer and grader, sewer and pipeline work, demolition and site modelling, checking dig depth without a second person on the staff, level control during backfilling and soil replacement.

Scope of delivery

• Leica LMR360R machine receiver, 868 MHz
• Magnetic bracket for machine mounting
• Charger
• NiMH batteries
• Carrying case
• User manual

Compatibility

The LMR360R works with any rotating laser, no particular laser model is prescribed. Range and achievable accuracy depend on the laser in use. The readout can be mirrored into the cab by radio, which requires the Leica LMD360R remote display, material number 773558 for 868 MHz. It is not part of this delivery. Receiver and display must share the same radio frequency.

Standards and origin

IP67 protection, waterproof and shock mounted housing. Radio operation on 868 MHz. Original Leica Geosystems instrument, material number 773557. EAN 7640110692486, customs code 9015900000, country of origin Hungary. The delivery contains batteries.