360 Degree Machine Receiver Kit 200 m with Magnetic Bracket and Cab Display 868 MHz - Leica LMR360R

Checking dig depth without sending anyone into the trench with a staff: that is what this kit is for. The Leica LMR360R machine receiver sits on the dipper stick and catches the beam of any rotating laser through a full 360 degrees within a 200 m radius, while the Leica LMD360R remote display mirrors the readout onto the windshield by radio. Fine mode holds 6 mm and the radio link runs on 868 MHz, the European SRD radio band.

Benefits

• Receiver and cab display in one item: both units come on the same radio frequency, so no separate ordering of a matching display is needed.
• 360 degree reception: the beam is caught from any machine position, so swinging towards the laser is unnecessary.
• 25 cm capture window and 200 m operating radius: the laser is found quickly and larger sites are covered from one set-up.
• 6 mm fine and 12 mm coarse: fine grading and bulk digging each get the right tolerance band, with 9 display channels in fine mode.
• Vertical indicator ± 5 degrees with arrows in the cab: the operator sees how to bring the stick plumb, which prevents over- and under-cutting.
• 30 hours of battery life: the rechargeable NiMH pack covers several shifts and refills in 12 hours.
• IP67 protection on the receiver: waterproof and fitted with internal shock mounts against machine vibration.
• Operation from the cab: every setting runs through the display menu, and the receiver display can be switched off to save its battery.

Technical data

Applications

Excavation and trenching, sewer and pipeline work, fine grading with dozer and grader, demolition and site modelling, level control during backfilling and soil replacement.

Scope of delivery

• Leica LMR360R machine receiver with magnetic bracket and case (material number 773557), quantity 1
• Leica LMD360R remote cab display (material number 773558), quantity 1
• Magnetic bracket for machine mounting
• Charger
• NiMH batteries
• Carrying case
• User manual

Compatibility

The kit works with any rotating laser, no particular laser model is prescribed. Range and achievable accuracy depend on the laser in use. Receiver and display are already matched to the same radio frequency of 868 MHz. If the receiver is needed without a display, Leica lists it on its own under material numbers 773556 and 773557.

Standards and origin

IP67 protection on the receiver, waterproof and shock mounted housing. Radio operation on 868 MHz. Original Leica Geosystems kit, material number 6003353. EAN 7640110694619, customs code 9015301000, country of origin Hungary. The kit contains batteries.