Images are examples, some edited with AI. The technical data are authoritative. AI notice
Controller CECC-S - Festo 574416
Festo pneumatic component for industrial automation and compressed-air applications in proven quality.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Festo pneumatic component for industrial automation and compressed-air applications in proven quality. The key technical data of this genuine Festo article are listed below.
Technical data
| Corrosion resistant class KBK | 0 - No corrosion stressing |
|---|---|
| Permission | RCM mark<br>c UL us - Listed (OL) |
| Material information | RoHs compliant |
| Nominal operating voltage DC [V] | 24 |
| Operating voltage | 20,4 - 30 V DC |
| Power input | 100 mA nominal bei 24 V DC |
| Max. power supply [A] | 6,0 |
| ambient temperature [°C] | 0 to 55 |
| Bearing temperature [°C] | -25 to 70 |
| Relative humidity | 95 %<br>Not condensing |
| Protection category | IP20 |
| Protection class | III |
| Product weight [g] | 200 |
| Insensitivity test to vibrations | according to EN 61131-2 |
| Insensitivity test to shock | according to EN 61131-2 |
| Electrical connection technology I/O | Bushing strip, pitch 3.5 mm |
| Status displays | LED |
| CPU data | Processor 400 MHz |
| Digital inputs, quantity | 12 |
| Digital inputs, switching logic | Positive logic (PNP) |
| Digital inputs, quick number inputs | 2, However max. 180 kHz |
| Digital inputs, input signal delay | 3 ms type |
| Digital inputs, input voltage / current | 24 V DC |
| Digital inputs, nominal value for TRUE | >= 15 VDC |
| Digital inputs, nominal value for FALSE | <= 5 VDC |
| Digital inputs, potential separation | Yes, opto coupler |
| Digital inputs, status display | LED |
| Max. line length | 30 m Eingänge |
| Digital outputs, quantity | 8 |
| Digital outputs, switching logic | Positive logic (PNP) |
| Digital outputs, contact | Transistor |
| Digital outputs, output voltage | 24 V DC |
| Digital outputs, output current | 500 mA |
| Digital outputs, potential separation | Yes, opto coupler |
| Digital outputs, switching frequency | max. 1 kHz |
| Digital outputs, short circuit proof | yes |
| Digital outputs, status display | LED |
| Report | CANopen<br>I-port<br>IO-Link<br>Modbus TCP |
| Fieldbus interface | CAN bus |
| Fieldbus interface, connection technology | Sub-D<br>9 pin<br>Plug |
| Fieldbus interface, transfer rate | 125, 250, 500, 800, 1000kbit/s<br>can be set via software |
| Fieldbus interface, galvanically separated | yes |
| USB interface | USB 1.1 |
| Ethernet, connection plug | RJ45 |
| Ethernet, number | 1 |
| Ethernet, data transfer speed | 10/100 Mbit/s |
| Ethernet supported protocols | TCP/IP, EasyIP, Modbus TCP |
| Programming software | CODESYS provided by Festo V3 |
| Programming language | Instruction list (AWL)<br>Contact diagram (KOP)<br>acc. to IEC 61131-3<br>Sequence language<br>Function plan<br>Structured text |
| CE certificate (see declaration of conformity) | to EU EMC directive |
| Certified awarding point | UL E239998-D1001 |
| Serial interface, quantity | 3 |
| Serial interface, type | 2 x RS232 / 1 x RS 485-A/422-A |
| Serial interface, connection technology | Plug |
| Serial interface, transfer rate | 300 ... 375000 Bit/s |
| IO-Link, report | Device V 1.0<br>Master V 1.1 |
| IO-Link, communication mode | configurable using software<br>Device COM1 (4.8 kBaud), COM2 (38.4 kBaud), COM3 (230.4 kBaud)<br>Master SIO, COM1 (4.8 kBaud), COM2 (38.4 kBaud), COM3 (230.4 kBaud) |
| IO-Link, port type | Device A<br>Master B |
| IO-Link, number of ports | Device 1<br>Master 1 |
| IO-Link, process data width OUT | Master parameterisable, 2-32 Byte |
| IO-Link, process data width IN | Master parameterisable, 2-32 Byte |
| IO-Link, minimum cycle time | Device 3,2 ms<br>Master 5 ms |
| IO link, storage | 2 kByte / port |
| IO-Link Master, output current | 3.5 A / port |
| IO-Link, connection technology | Cage Clamp<br>Plug<br>Device 3 pin<br>Master 5-pin |
| IO-Link, communication | C/Q LED green<br>C/Q LED red |
| IO-Link, operation-readiness display | L+ LED green on<br>L+ LED green off |
| Encoder inputs, quantity | 1 |
| Encoder inputs, resolution | 32 Bit |
| Encoder inputs, signal range | 5 V differential (RS422) |
| Encoder inputs, max. input frequency [kHz] | 1.000 |
| Encoder inputs, sensor supply voltage | 5 V DC (100 mA) |
| Weight | 0.28 kg |
| Manufacturer | Festo |
| Manufacturer Nr. | CECC-S |
| EAN | 4052568223076 |
| HS-Code | 85371091 |
| GPSR manufacturer information | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Condition of article | New |
| Article authenticity | Original product |
| Corrosion resistance class CRC | 0 - No corrosion stressing |
| Norm | DIN EN 61131-2, DIN EN 61131-3 |
| Protection class (IP) | IP20 |
| Temperature (max.) | 55 |
Downloads
Accessories
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
