What are Bosch Rexroth strut profiles and which industries use them for mechanical assemblies?

Bosch Rexroth strut profiles are precision-engineered aluminum extrusion systems designed for modular mechanical construction in industrial workstation and automation applications. These profiles feature standardized T-slot groove systems that enable rapid assembly of frames, conveyor supports, machine guards, and ESD workstations across automotive manufacturing, electronics assembly, packaging machinery, and laboratory environments. The profile system supports loads from light-duty 30x90mm configurations to heavy-duty 100x200mm structural members, with groove widths of 8mm, 10mm, and 20mm accommodating various fastening accessories and connection elements.

How do I select the correct Bosch Rexroth profile dimensions based on load requirements and span length?

Profile selection depends on the section modulus required for your specific load and span combination, with cross-sectional dimensions ranging from 30x90mm for light applications to 100x200mm for structural loads exceeding 500kg. The groove spacing designation follows the format 'slot width x profile length', where standard lengths include 5600mm and 6070mm with custom cutting available. For typical workstation applications, 60x60mm profiles with 20mm grooves handle distributed loads up to 200kg per meter, while 90x90mm profiles with 6mm grooves support concentrated loads exceeding 300kg at mid-span without deflection beyond ISO tolerance limits.

Which international standards govern Bosch Rexroth profile manufacturing and assembly tolerances?

Bosch Rexroth profiles comply with DIN EN 755-9 for aluminum extrusion dimensional tolerances and ISO 9001 quality management standards for consistent manufacturing processes. The T-slot groove geometry adheres to DIN 508 specifications for standardized fastener compatibility, ensuring interchangeability with certified connection elements and accessories. Profile straightness maintains tolerances within 0.5mm per meter length according to EN 12020-2, while surface finish meets Ra 1.6 requirements for smooth sliding applications and proper seal integration in pneumatic and hydraulic system mounting applications.

What are the main differences between R40 and R45 series Bosch Rexroth profile variants?

The R40 series features standard rectangular cross-sections with parallel groove orientation optimized for linear bearing applications and belt conveyor mounting, while R45 series profiles incorporate angular groove configurations at 45-degree orientations for enhanced torsional rigidity. R40 profiles like the 60x60 20x6070mm variant provide maximum accessibility for T-slot nuts and fasteners, whereas R45 profiles such as the 45x90x90L series offer superior moment resistance for cantilever loading conditions. The groove depth varies between series, with R40 maintaining 11mm depth for standard fasteners and R45 providing 8.2mm depth for specialized angular connectors and pivot joints.

What connection methods and accessories are required for Bosch Rexroth profile installation?

Bosch Rexroth profiles utilize T-slot nuts, end fasteners, and angular connectors that slide into the groove system before final positioning and tightening to specified torque values between 8-25 Nm depending on fastener size. The modular design accommodates both rigid connections using corner brackets with M8 or M10 bolts, and adjustable joints using pivot connectors for applications requiring angular positioning or thermal expansion compensation. Profile cutting requires carbide-tipped saws with 120-tooth blades operating at 3000 rpm to maintain groove integrity and prevent aluminum burr formation that could interfere with accessory installation and sealing performance.

What are the operating temperature limits and environmental ratings for Bosch Rexroth aluminum profiles?

Bosch Rexroth aluminum profiles maintain structural integrity across operating temperatures from -40°C to +80°C with minimal thermal expansion of 23 x 10⁻⁶ per Kelvin, making them suitable for both refrigerated environments and moderate heating applications. The anodized surface treatment provides Type II anodizing per MIL-A-8625 with 12-25 micron coating thickness for corrosion resistance equivalent to IP54 environmental protection when properly sealed. Load-bearing capacity remains constant within the temperature range, though thermal cycling above 60°C may require expansion joints every 6 meters to prevent stress concentration at fixed connection points in large structural assemblies.

What maintenance intervals and inspection procedures are recommended for Bosch Rexroth profile assemblies?

Bosch Rexroth profile assemblies require annual inspection of connection torque values and groove condition, with retightening of fasteners to original specifications if loosening exceeds 10% of initial torque measurement. The anodized surface should be cleaned quarterly using mild alkaline detergent to remove industrial contamination that could accelerate corrosion, particularly in environments exceeding 70% relative humidity. Critical load-bearing joints require semi-annual verification of straightness within 0.5mm per meter tolerance, while T-slot grooves need periodic clearing of debris accumulation that could prevent proper fastener engagement and compromise structural integrity over the typical 20-year service life.

Strut profiles Bosch Rexroth

Basic mechanic elements Bosch Rexroth

Bosch Rexroth structural profiles are precision-extruded aluminium sections engineered for modular assembly systems, machine frames, and workstation structures. The system covers three primary groove pitches - Nut 6 (R20 grid), Nut 8 (R30 grid), and Nut 10 (R40/R45/R50/R60 grids) - with groove widths toleranced to ISO 2768 for repeatable connector fit. Profile cross-sections range from compact 20x20 mm struts to heavy-duty 80x160 mm frame members, supporting distributed loads from 150 N/m up to several kN/m depending on profile class and span length.

As an authorised distributor, esd.equipment stocks 1,149 Bosch Rexroth profile line items - including strut profiles, frame profiles, cover profiles, clamp profiles, angle profiles, guide rails, square tubes, rubber profiles, conveyor-medium profiles, and groove plates - all compliant with Bosch Rexroth's MTpro design standard and compatible with the full range of Rexroth connectors, nuts, and accessories.

Strebenprofil Bosch Rexroth Universal strut profiles, all groove systems, anodised aluminium EN AW-6063 Strebenprofile Nut 6 R20 Groove width 6 mm, R20 grid, compact cross-sections from 20x20 mm Strebenprofile Nut 8 R30 Groove width 8 mm, R30 grid, 30x30 to 60x60 mm section range Strebenprofile Nut 10 R40 Groove width 10 mm, R40 grid, medium-duty frame and machine base profiles Strebenprofile Nut 10 R45 Groove width 10 mm, R45 grid, 45x45 to 90x90 mm, compatible with TS conveyor systems Strebenprofile Nut 10 R50 Groove width 10 mm, R50 grid, 50x50 to 100x100 mm, heavy-duty machine frames Strebenprofile Nut 10 R60 Groove width 10 mm, R60 grid, 60x60 to 120x120 mm, large-span structures Rahmenprofil 22,5x45 Frame profile 22.5x45 mm, slim-line enclosure and guard panel borders Rahmenprofil 22,5x30 Frame profile 22.5x30 mm, lightweight door frames and panel trim applications Profilschiene, Laufwagen Guide rails and carriages for linear traversing, load capacity up to ca. 200 N/m Vierkantrohr Square-tube profiles, closed-section, compatible with Rexroth connector range Winkelprofil Angle profiles for 90 deg corner joints, groove-compatible, anodised finish Klemmprofil Clamp profiles for panel clamping and cover retention in Rexroth frame systems Abdeckprofile Cover profiles for open grooves, snap-fit PVC/PP, groove widths 6, 8, and 10 mm Abdeckkappen End caps for profile faces, plastic, colour-matched to standard Rexroth anodising Gummiprofil Rubber edge and sealing profiles, shore hardness ca. 60 A, UV-stabilised Einhängeprofil Hook-in profiles for tool holders and accessory rails, R20/R30/R45 groove fit Nutenplatte 30x100 Groove plate 30x100 mm, multi-slot aluminium panel for fixture and jig mounting Radiusausgleich Radius compensation profiles for curved conveyor transitions and angled junctions Fördermedien Profile Profiles for integrating conveyor media - pneumatic lines, cable ducts, drive shafts

Key technical advantages - Bosch Rexroth Profiles at a glance

⚙ 3 groove systems - Nut 6/8/10 - R20, R30, R40/R45/R50/R60 grids for full cross-compatibility

▨ Section range 20x20 to 120x120 mm - compact struts to heavy-duty machine base profiles

🛡 EN AW-6063 aluminium alloy - anodised to DIN EN ISO 7599, corrosion class C3

🔍 Toleranced to ISO 2768-m - consistent connector fit across all groove widths and grid pitches

📦 1,149 line items in stock - strut, frame, cover, clamp, angle, guide rail, and specialty profiles

✓ MTpro system compatible - fully interchangeable with Bosch Rexroth connectors, nuts, and accessories

Bosch Rexroth Profile Systems - Product Overview

Profile Series	Groove System	Grid Pitch	Typical Cross-Sections	Key Application
Strebenprofil Nut 6	Nut 6	R20	20x20, 20x40, 40x40 mm	Light fixtures, guards, small workstation frames
Strebenprofil Nut 8	Nut 8	R30	30x30, 30x60, 60x60 mm	Assembly workstations, enclosures, medium frames
Strebenprofil Nut 10 R40	Nut 10	R40	40x40, 40x80, 80x80 mm	Machine bases, conveyor frames, structural supports
Strebenprofil Nut 10 R45	Nut 10	R45	45x45, 45x90, 90x90 mm	TS 2plus/TS 5 conveyor integration, production lines
Strebenprofil Nut 10 R50	Nut 10	R50	50x50, 50x100, 100x100 mm	Heavy machine frames, automation cells, gantries
Strebenprofil Nut 10 R60	Nut 10	R60	60x60, 60x120, 120x120 mm	Large-span structures, press frames, load-bearing rigs
Rahmenprofil 22.5x45	Frame	-	22.5x45 mm	Door frames, panel borders, enclosure trims
Nutenplatte 30x100	Plate	R30	30x100 mm cross-section	Fixture plates, jig bases, multi-point clamping surfaces

Typical application areas: Electronics assembly and SMT line structures (IEC 61340-5-1, IPC-A-610), automotive body shop and powertrain assembly fixtures (VDA 6.3, IATF 16949), medical device production workstations (ISO 13485), semiconductor fab equipment frames (SEMI S2), aerospace MRO and component assembly jigs (AS9100), mechanical engineering machine guards and safety enclosures (ISO 14120, EN ISO 13857), intralogistics conveyor support structures and transfer systems compatible with Bosch Rexroth TS 2plus and VarioFlow+.

✓

Authorised Bosch Rexroth Distributor 1,149 genuine profile line items - Nut 6, Nut 8, and Nut 10 groove systems

📦

Direct Stock Availability Strut, frame, cover, clamp, angle, guide rail, and groove plate profiles ex-stock

🛡

Full System Compatibility All profiles toleranced to ISO 2768-m, MTpro-verified, compatible with Rexroth TS 2plus and VarioFlow+

Add to Wish List Add to Compare

Bosch Rexroth 3842993716-1000. Strut profile, 40X120L Q&E. 1000 mm
€65.03
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Bosch Rexroth 3842990354-1000. Strut profile, 60X60 M12/M16. 1000 mm
€64.94
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Bosch Rexroth 3842990331-1000. Strut profile, 45X90 D17VS/-. 1000 mm
€62.45
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Bosch Rexroth 3842990373-1000. Strut profile, 60X60 M16/D17. 1000 mm
€61.92
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Bosch Rexroth 3842993193-1000. Strut profile, 40X80X80L. 1000 mm
€61.56
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Bosch Rexroth 3842993730-1000. Strut profile, 40X80X80L Q&E. 1000 mm
€61.56
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Bosch Rexroth 3842993449-1000. Strut profile, 90X90 SL. 1000 mm
€60.36
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Bosch Rexroth 3842993085-1000. Strut profile, 45X60 2XD17LF. 1000 mm
€59.51
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Bosch Rexroth 3842990300-1000. Strut profile, 45X90. 1000 mm
€59.28
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Bosch Rexroth 3842523241. Strut profile 20x40x40
€58.93
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Bosch Rexroth 3842990357-1000. Strut profile, 60X60 D17/D17. 1000 mm
€58.88
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Bosch Rexroth 3842990359-1000. Strut profile, 60X60 D17/D17VS. 1000 mm
€58.88
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Bosch Rexroth 3842990352-1000. Strut profile, 60X60 M16/-. 1000 mm
€58.75
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Bosch Rexroth 3842990355-1000. Strut profile, 60X60 M12/D17. 1000 mm
€58.75
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Bosch Rexroth 3842990353-1000. Strut profile, 60X60 M12/M12. 1000 mm
€58.63
Excl. 19% VAT , excl. Shipping Cost
Add to Wish List Add to Compare

Bosch Rexroth 3842993084-1000. Strut profile, 45X90L 2XD17LF. 1000 mm
€58.20
Excl. 19% VAT , excl. Shipping Cost