Portable beveler HB-15B 230V, 0C ~ 15C - Nitto Kohki 131000201

Large chamfers on plate and steel structures normally call for a milling machine, which means transport and clamping. The portable beveler brings a chamfer capacity of up to 15C to the part and works with a chamfer angle adjustable from 15 to 45 degrees.

• Chamfer capacity up to 15C, so heavy weld preparations can be produced without a stationary machine
• Chamfer angle adjustable from 15 to 45 degrees, one machine covers different weld preparations and edge breaks
• Mains operation at 910 W rated power consumption, a standard socket at the workstation is enough
• Twelve indexable inserts supplied as standard, the cutting edge is indexed rather than reground
• Wrench set and hook spanner included, tool changes and adjustment need no special tooling

Technical data

Applications

• Weld preparation on thick plate in steel and vessel fabrication
• Chamfering long edges on plates and profiles
• Edge breaking on welded assemblies
• Rework of flame cut edges
• Chamfering on installed parts that can no longer be moved

Standard accessories

• Hex.Socket Screw Key 4,5,6 mm: each 1 pc.
• Spanner 24x27: 1 pc.
• Hook Spanner 25~28: 1 pc.
• 3mm T Wrench Key: 1 pc.
• TA9A093 Tip 12.7 sq.12 pcs. set: 1 set

Operating principle

The electric motor drives a cutter head fitted with indexable inserts. The machine rests on the workpiece with its guide and is pushed along the edge, with chamfer size and angle set beforehand.