The product may differ from the illustration
Festo pneumatic component for industrial automation and compressed-air applications in proven quality.
Analogue Output Modu CPX-E-4AO-U-I - Festo 4080494
FESTO Original product
Net price (excl. VAT)
€345.26
Excl. 19% VAT , excl. Shipping Cost
Item FES-4080494
Manufacturer no. CPX-E-4AO-U-I
Personal expert advice
Brand new Specialist dealer since 2009 Original product Worldwide shipping
Product data
Manufacturer no.CPX-E-4AO-U-I
EAN4052568291143
Customs tariff number85389099
ConditionNew
Article
FES-4080494
Frequently Bought Together
- This Item: €345.26Excl. 19% VAT , excl. Shipping Cost
- Insulating Plate CPX-P-AB-IP - Festo 565708 €19.70Excl. 19% VAT , excl. Shipping Cost
- Electrical Connection CAPC-F1-E-M12 - Festo 570042 €91.57Excl. 19% VAT , excl. Shipping Cost
Total price
Festo pneumatic component for industrial automation and compressed-air applications in proven quality. The key technical data of this genuine Festo article are listed below.
| Dimensions W x L x H | 18.9 mm x 76.6 mm x 124.3 mm |
| Pitch dimension [mm] | 18,9 |
| Quantity outputs: | 4 |
| Diagnosis via LED | Error per channel<br>Error per module |
| Diagnosis via bus | General errors<br>Short circuit/overload actuator supply<br>Short circuit/overload analogue output<br>Parametering error<br>Exceeding nominal range<br>Nominal range not reached<br>Under-voltage load supply |
| Module parameter | Deactivate actuator supply<br>Data format analogue outputs<br>Diagnosis short circuit actuator supply<br>Diagnosis parametering error<br>Diagnosis under-voltage load supply<br>Behaviour after short circuit/overload actuator supply<br>Behaviour after short circuit/overload analogue output |
| Channel parameter | Forces channel x<br>Approval diagnosis wire break/idle<br>Approval diagnosis parametering error<br>Approval diagnosis overload/short circuit<br>Signal range per channel |
| Fuse (short circuit) | Internal electronic fuse Per module |
| Intrinsic power input operating voltage load | Type 15 mA |
| Max. cumulative current outputs per module [A] | 2 |
| Nominal operating voltage DC outputs [V] | 24 |
| Potential separation channel - internal bus | yes |
| Potential separation channel - channel | no |
| Permitted voltage oscillations outputs | ± 25 % |
| Voltage supply, connection type | 2x multi tube holder |
| Voltage supply, connection technology | Spring tension clamp |
| Voltage supply, number of poles/wires | 4 |
| Voltage supply, conductor cross-section [mm²] | 0.2 to 1.5 |
| Voltage supply, information on conductor cross-section | 0.2 - 2.5 mm² for flexible conductor without wire end sleeve |
| Permission | RCM mark |
| CE certificate (see declaration of conformity) | to EU EMC directive |
| Oscillation strength | Transport use test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with degree of severity 1 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistant class KBK | 0 - No corrosion stressing |
| Bearing temperature [°C] | -20 to 70 |
| Relative humidity | 95 %<br>Not condensing |
| Protect against direct and indirect contact | Funktionskleinspannung mit sicherer Trennung (PELV) |
| Protection category | IP20 |
| ambient temperature [°C] | -5 to 50 |
| Information about ambient temperature | -5 - 60 °C with vertical installation |
| Product weight [g] | 96 |
| Max. address volume outputs [Byte] | 8 |
| Electrical connection: outlet, function | Analogue output |
| Electrical connection: outlet, connection type | 4x multi tube holder |
| Electrical connection: outlet, connection technology | Spring tension clamp |
| Electrical connection: outlet, number of pins / wires | 4 |
| Electrical connection: outlet, conductor cross-section [mm²] | 0.2 to 1.5 |
| Electrical connection: outlet, information on conductor cross-section | 0.2 - 2.5 mm² for flexible conductor without wire end sleeve |
| Fastening type | With Slot rail |
| Material information | LABS containing materials included<br>RoHs compliant |
| Housing material | PA |
| Intrinsic power input operating voltage electronics/sensors | Type 60 mA |
| Nominal operating voltage DC electronics / sensor [V] | 24 |
| Permitted voltage oscillations electronics/sensors | ± 25 % |
| Measured parameter | Voltage<br>Current |
| Repeatability | ±0.05 % at 25 °C |
| Use error limits related to ambient temperature range | ±0,3 % |
| Base error limit at 25 °C | ±0,1 % |
| Power blackout bridging [ms] | 10 |
| Signal range | -10 - 10 V<br>-20 - 20 mA<br>-5 - 5 V<br>0 - 10 V<br>0 - 20 mA<br>4 - 20 mA |
| Data format | 15 bit + sign<br>linear scale |
| Max. line length | 30 m<br>Shielded |
| Electrical connection: outlet 2, function | Functional ground |
| Electrical connection: outlet 2, connection type | Multi tube holder |
| Electrical connection: outlet 2, connection technology | Spring tension clamp |
| Electrical connection: outlet 2, number of pins / wires | 4 |
| Electrical connection: outlet 2, wiring diagram | 00995842 |
| Electrical connection: outlet 2, conductor cross-section [mm²] | 0.2 to 1.5 |
| Electrical connection: outlet 2, information on conductor cross-section | 0.2 - 2.5 mm² for flexible conductor without wire end sleeve |
| Manufacturer Nr. | CPX-E-4AO-U-I |
|---|---|
| Manufacturer | Festo |
| EAN | 4052568291143 |
| Weight | 0.096000 |
| HS-Code | 85389099 |
| GPSR manufacturer information | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Article authenticity | Original product |
| Condition of article | New |
| Werkstoff | Polyamid (PA) |
| Schutzart | IP20 |
Write Your Own Review
Customers Who Bought This Item Also Bought
Related Products
Check items to add to the cart or
