Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
Festo pneumatic component for industrial automation and compressed-air applications in proven quality.
Io-Link Master Modul CPX-E-4IOL - Festo 4080495
FESTO Original product
Net price (excl. VAT)
€276.21
Item FES-4080495
Manufacturer no. CPX-E-4IOL
Personal expert advice
Brand new Specialist dealer since 2009 Original product Worldwide shipping
Product data
Manufacturer no.CPX-E-4IOL
EAN4052568291150
Customs tariff number85389099
ConditionNew
Article
FES-4080495
Frequently Bought Together
- This Item: €276.21
- Io-Link Master Usb CDSU-1 - Festo 8091509 €552.43
- Input/Output Module CDPX-EA-V2 - Festo 8023321 €348.27
Total price
Festo pneumatic component for industrial automation and compressed-air applications in proven quality. The key technical data of this genuine Festo article are listed below.
| Dimensions W x L x H | 18.9 mm x 76.6 mm x 124.3 mm |
| Pitch dimension [mm] | 18,9 |
| Diagnosis via LED | Error per module<br>Status per channel |
| Diagnosis via bus | Under-voltage<br>general error<br>Device missing/failed<br>Wire break<br>Module error<br>Short circuit<br>Parameter error<br>under running/over running |
| Module parameter | Diagnosis short circuit actuator supply<br>Deactivate sensor supply<br>Behaviour after short circuit/overload |
| Channel parameter | Deactivate actuator supply<br>Device error code<br>Force channel x<br>Channel mode<br>channel status<br>cycle time |
| Fuse (short circuit) | internal electronic fuse, load per channel<br>internal electronic fuse, sensor per module |
| Intrinsic power input operating voltage load | Type 15 mA |
| Nominal operating voltage DC outputs [V] | 24 |
| Potential separation channel - internal bus | no |
| Potential separation channel - channel | no |
| Permitted voltage oscillations outputs | ± 25 % |
| Voltage supply, connection type | Multi tube holder |
| Voltage supply, connection technology | Spring tension clamp |
| Voltage supply, number of poles/wires | 4 |
| Voltage supply, conductor cross-section [mm²] | 0.2 to 1.5 |
| Voltage supply, information on conductor cross-section | 0.2 - 2.5 mm² for flexible conductor without wire end sleeve |
| Permission | RCM mark |
| CE certificate (see declaration of conformity) | to EU EMC directive |
| Oscillation strength | Transport use test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with degree of severity 1 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistant class KBK | 0 - No corrosion stressing |
| Bearing temperature [°C] | -20 to 70 |
| Relative humidity | 95 %<br>Not condensing |
| Protect against direct and indirect contact | Funktionskleinspannung mit sicherer Trennung (PELV) |
| Protection category | IP20 |
| ambient temperature [°C] | -5 to 50 |
| Information about ambient temperature | -5 - 50 °C with horizontal installation |
| Product weight [g] | 96 |
| Fastening type | With Slot rail |
| Material information | LABS containing materials included<br>RoHs compliant |
| Housing material | PA |
| Intrinsic power input operating voltage electronics/sensors | Type 50 mA |
| Nominal operating voltage DC electronics / sensor [V] | 24 |
| Permitted voltage oscillations electronics/sensors | ± 25 % |
| Report | IO-Link |
| IO-Link, report | Master V 1.1 |
| IO-Link, communication mode | configurable using software<br>SIO, COM1 (4.8 kBaud), COM2 (38.4 kBaud), COM3 (230.4 kBaud) |
| IO-Link, port type | B |
| IO-Link, number of ports | 4 |
| IO-Link, process data width OUT | Parameterisable 8 - 32 Bytes |
| IO-Link, process data width IN | Parameterisable 8 - 32 Bytes |
| IO-Link, minimum cycle time | Depends on minimum supported cycle time of the connected IO link devices |
| IO-Link, communication | C/Q LED green |
| Electrical connection IO link, connection type | 4x multi tube holder |
| Electrical connection IO link, connection technology | Spring tension clamp |
| Electrical connection IO link, number of pins / wires | 6 |
| Electrical connection IO link, conductor cross-section [mm²] | 0.2 to 1.5 |
| Electrical connection IO link, information on conductor cross-section | 0.2 - 2.5 mm² for flexible conductor without wire end sleeve |
| Manufacturer Nr. | CPX-E-4IOL |
|---|---|
| Manufacturer | Festo |
| EAN | 4052568291150 |
| Weight | 0.105000 |
| HS-Code | 85389099 |
| GPSR manufacturer information | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Article authenticity | Original product |
| Condition of article | New |
| Werkstoff | Polyamid (PA) |
| Schutzart | IP20 |
Write Your Own Review
Customers Who Bought This Item Also Bought
Related Products
Check items to add to the cart or
