The product may differ from the illustration
Festo valve for fast, reliable control of compressed-air direction and flow.

Solenoid Valve MHJ10-S-2,5-LF - Festo 572080

FESTO Original product
Net price (excl. VAT)
€70.61
Excl. 19% VAT , excl. Shipping Cost
Available Fast shipping
Item FES-572080
Manufacturer no. MHJ10-S-2,5-LF
Personal expert advice
Brand new Specialist dealer since 2009 Original product Worldwide shipping
Product data
Manufacturer no.MHJ10-S-2,5-LF
EAN4052568102357
Customs tariff number84812090
ConditionNew
Article
FES-572080

Festo valve for fast, reliable control of compressed-air direction and flow. The key technical data of this genuine Festo article are listed below.

Valve function2/2 closed monostable
Actuation typeElectrical
Build.width [mm]10
Normal nominal flow [l/min]50
Operating pressure [bar]0.5 to 8
Construction set upPoppet valve without reset spring
Reset modePneumatic spring
Protection categoryIP65
Pitch dimension [mm]10,5
Information about operationPower supply must be able to deliver at least 1.7 A without a voltage breakthrough<br>Do not operate without flow<br>For block assembly with flow max. ambient temperature 45 °C.
Sealing principleHard
installation positionarbitrary
Hand assist actuationnone
Control typeDirect
Flow directionNot reversible
b-value0.5
C-value [l/sbar]0,20
Max. switching frequency [Hz]500
Shifting time on at 4 bar and 24 V in new condition [ms]0,8
Shifting time off at 4 bar and 24 V in new condition [ms]1,0
Shifting time on at 0.5 bar and 24 V in new condition [ms]0,7
Shifting time off at 0.5 bar and 24 V in new condition [ms]0,9
Tolerance shifting time off+15 %/-25 %
Tolerance shifting time on±15 %
Operating voltage range DC [V]21.6 to 26.4
Power-on time100 %
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Information about operating and control mediumOiled operation not possible
Limits ambient and media temperatureDepending on the switching frequency
Corrosion resistant class KBK2 - moderate corrosion stress
Bearing temperature [°C]-20 to 50
Permitted surface temperature magnet [°C]120
Medium temperature [°C]-5 to 60
ambient temperature [°C]-5 to 60
Max. tightening torque Valve fastening [Nm]0,70
Product weight [g]75
Electrical connection3-wire<br>cable
Fastening typeon connection plate
Pneumatic connection 1Connection plate
Pneumatic connection 2Connection plate
Material informationRoHs compliant
Seals materialHNBR
Housing materialPA reinforced<br>PPS reinforced
Screws materialSteel
KC-markKC-EMV
CE certificate (see declaration of conformity)to EU EMC directive
Reverse polarity protectionfor operating voltage
Additional functionsSpark suppression<br>Holding current reduction with energy recovery<br>Protection switch off
Eingangswiderstand [kOhm]34
Coil characteristic value24 V DC: Low current phase 2 W, high current phase 7 W
Trigger signal range DC [V]3 to 30
Information about incoming current0,09 - 0,44 mA bei einem Triggersignal von 3 - 15 V<br>0,44 - 15,44 mA bei einem Triggersignal von 15 - 30 V<br>Anstieg linear
Permitted voltage oscillations± 10 %
Cable length [MTR]2,50
Cable sleeve materialPUR
Shifting time on at 8 bar and 24 V in new condition [ms]0,9
Shifting time off at 8 bar and 24 V in new condition [ms]0,9
More Information
Manufacturer Nr. MHJ10-S-2,5-LF
Manufacturer Festo
EAN 4052568102357
Weight 0.075000
HS-Code 84812090
GPSR manufacturer information Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
Article authenticity Original product
Condition of article New
Werkstoff Polyamid (PA)
Betriebsdruck max [bar] 8.000000
Schutzart IP65
Write Your Own Review
You're reviewing:Solenoid Valve MHJ10-S-2,5-LF - Festo 572080
Your Rating