Images are examples, some edited with AI. The technical data are authoritative. AI notice
Solenoid Valve MHJ10-S-2,5-HF - Festo 567502
Festo valve for fast, reliable control of compressed-air direction and flow.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Festo valve for fast, reliable control of compressed-air direction and flow. The key technical data of this genuine Festo article are listed below.
Technical data
| Valve function | 2/2 closed monostable |
|---|---|
| Actuation type | Electrical |
| Build.width [mm] | 10 |
| Normal nominal flow [l/min] | 160 |
| Operating pressure [bar] | 0.5 to 6 |
| Construction set up | Poppet valve without reset spring |
| Reset mode | Pneumatic spring |
| Protection category | IP65 |
| Pitch dimension [mm] | 10,5 |
| Information about operation | Power supply must be able to deliver at least 1.7 A without a voltage breakthrough<br>Do not operate without flow |
| Sealing principle | Hard |
| installation position | arbitrary |
| Hand assist actuation | none |
| Control type | Direct |
| Flow direction | Not reversible |
| b-value | 0.36 |
| C-value [l/sbar] | 0,66 |
| Max. switching frequency [Hz] | 500 |
| Shifting time on at 4 bar and 24 V in new condition [ms] | 1,2 |
| Shifting time off at 4 bar and 24 V in new condition [ms] | 0,6 |
| Shifting time on at 0.5 bar and 24 V in new condition [ms] | 1,0 |
| Shifting time off at 0.5 bar and 24 V in new condition [ms] | 0,8 |
| Shifting time on at 6 bar and 24 V in new condition [ms] | 1,3 |
| Shifting time off at 6 bar and 24 V in new condition [ms] | 0,6 |
| Tolerance shifting time off | +15 %/-25 % |
| Tolerance shifting time on | ±15 % |
| Operating voltage range DC [V] | 21.6 to 26.4 |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Information about operating and control medium | Oiled operation not possible |
| Limits ambient and media temperature | Depending on the switching frequency |
| Corrosion resistant class KBK | 2 - moderate corrosion stress |
| Bearing temperature [°C] | -20 to 50 |
| Permitted surface temperature magnet [°C] | 120 |
| Medium temperature [°C] | -5 to 60 |
| ambient temperature [°C] | -5 to 60 |
| Max. tightening torque Valve fastening [Nm] | 0,70 |
| Product weight [g] | 75 |
| Electrical connection | 3-wire<br>cable |
| Fastening type | on connection plate |
| Pneumatic connection 1 | Connection plate |
| Pneumatic connection 2 | Connection plate |
| Material information | RoHs compliant |
| Seals material | HNBR |
| Housing material | PA reinforced<br>PPS reinforced |
| Screws material | Steel |
| Operating conditions according to DIN/VDI 0580 | S3 25% 20 min. for block mounting<br>S3 50% 20 min. for single valve |
| KC-mark | KC-EMV |
| CE certificate (see declaration of conformity) | to EU EMC directive |
| Reverse polarity protection | for operating voltage |
| Additional functions | Spark suppression<br>Holding current reduction with energy recovery<br>Protection switch off |
| Eingangswiderstand [kOhm] | 34 |
| Coil characteristic value | 24 V DC: Low current phase 3.2 W, high current phase 14,5 W |
| Trigger signal range DC [V] | 3 to 30 |
| Information about incoming current | 0,09 - 0,44 mA bei einem Triggersignal von 3 - 15 V<br>0,44 - 15,44 mA bei einem Triggersignal von 15 - 30 V<br>Anstieg linear |
| Permitted voltage oscillations | ± 10 % |
| Cable length [MTR] | 2,50 |
| Cable sleeve material | PUR |
| Weight | 0.1 kg |
| Manufacturer | Festo |
| Manufacturer Nr. | MHJ10-S-2,5-HF |
| EAN | 4052568100667 |
| HS-Code | 84812090 |
| GPSR manufacturer information | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Condition of article | New |
| Article authenticity | Original product |
| Material | Polyamide (PA) |
| Dichtmaterial | HNBR |
| Medium | Compressed air |
| Funktion | 2/2 closed monostable |
| Durchfluss [l/min] | 160 |
| Corrosion resistance class CRC | 2 - moderate corrosion stress |
| Mounting position | arbitrary |
| Design | Poppet valve without reset spring |
| Norm | VDE 0580 |
| Operating conditions | ISO 8573-1 |
| Series | MHJ10 |
| Betriebsdruck max [bar] | 6 |
| Protection class (IP) | IP65 |
| Temperature (max.) | 60 |
Downloads
Accessories
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
