Pipe laser package green beam 200 m with Alignmaster and IR remote control - Leica Piper 200G

The Leica Piper 200G transfers line and grade in sewer and pipeline construction across a working range of up to 200 m. The instrument self-levels to ± 1.5 mm at 30 m and covers a grade range from -10 % to +25 %. This package is the top specification of the Piper range, because it combines the Alignmaster automatic targeting system with the IR remote control, material number 746157.

Key benefits

• Alignmaster, the automatic targeting system, is listed by the manufacturer for the Piper 200 and the Piper 200G only and takes over aiming at the target plate.
• Green 520 nm beam with four times better visibility, which allows a longer measuring distance from the instrument position and higher levelling accuracy, also in bright surroundings. Frequently used in water and waste water applications.
• IR remote control included, range 150 m in front of the instrument and 10 m behind it, for line control and further functions from a distance.
• Automatic grade compensation, because a roll of the housing of up to ± 3° is compensated and the grade error is corrected by the instrument.
• Self-levelling range from -15 % to +30 % and a housing diameter of 96 mm, so the laser fits into a pipe from 100 mm upwards.
• Die cast aluminium housing with IPx8 protection, operation from -20 °C to +50 °C and up to 40 hours of runtime per battery charge.

Technical data

Applications

Sewer and pipeline construction, waste water lines and house connections. The laser works inside pipes from 100 mm, over the top on the pipe axis and in the manhole. The green beam stays clearly visible in bright surroundings, which helps with checks over the full section length and with water and waste water applications.

Scope of delivery

• Leica Piper 200G pipe laser (laser class 3R) with transport container, material number 938490, 1 piece
• GKL311 Professional single charger, material number 799185, 1 piece
• GEV192 AC/DC power supply unit for GKL112/GKL311, EU version, material number 733254, 1 piece
• GEB221 li-ion battery, 7.4 V / 4.4 Ah, material number 733270, 1 piece
• IR remote control for Leica Piper, material number 746157, 1 piece
• Target assembly with 150 mm to 300 mm insert, blue, material number 915443, 1 piece
• User manual Leica Piper 100/200, German, material number 748821, 1 piece

The package is ready for use without further purchases, because battery, charger and power supply unit are already included. Leica Geosystems offers additional Piper accessories, among them the PTC100 target plate with 100 mm for narrow pipes, material number 815613, and the red target set with a small 300 mm insert, material number 725858. The GEB221 battery and the GKL311 charger are also used with other Leica instruments.

Standards and origin

The Leica Piper 200G is a class 3R laser product according to IEC 60825-1:2014 with a maximum average radiant power of 4.8 mW. The housing reaches protection class IPx8, the manufacturer does not state a dust rating. The shipment contains a lithium-ion battery and is labelled accordingly. EAN 7640180530800, customs tariff number 9015301000, country of origin Singapore. The manufacturer is Leica Geosystems AG, Heerbrugg, Switzerland.