Pipe laser kit red 200 m with IR remote control and target set - Leica Piper 100

The Leica Piper 100 carries line and grade in sewer and pipeline construction and holds a self-levelling accuracy of ± 1.5 mm at 30 m. This kit adds the IR remote control, material number 746157, which shifts the line from 150 m in front of the instrument and from 10 m behind it, so nobody has to climb back down the manhole. The red beam at 635 nm works up to 200 m and is rated laser class 3R.

Key benefits

• The included IR remote control 746157 drives the laser from 150 m in front of the instrument and from 10 m behind it, which removes the walk back to the unit.
• Grade range of -10 % to +25 % covers falling and rising sections, the self-levelling range runs from -15 % to +30 %.
• Self-levelling accuracy of ± 1.5 mm at 30 m, defined at 25 °C, with a line movement of 6 m at 30 m.
• Automatic grade compensation, a housing roll of up to ± 3° is corrected by the instrument itself.
• Die-cast aluminium housing rated IPx8, operation from -20 °C to +50 °C, 96 mm diameter for pipes from 100 mm.
• GEB221 li-ion battery with up to 40 hours of operation and a 4 hour charging time, GKL311 charger and GEV192 power supply are included.

Technical data

Applications

Sewer and pipeline construction, foul and storm water lines and house connections. The instrument works inside the pipe, over the top and in the manhole, and its 96 mm diameter allows use in pipes from 100 mm. The remote control lets the line be trimmed from the far end of the pipe while the laser stays in the manhole.

Scope of delivery

• Leica Piper 100 pipe laser (laser class 3R) with carrying case, material number 748773, 1 piece
• GKL311 Professional single charger, material number 799185, 1 piece
• GEV192 AC/DC power supply unit for GKL112/GKL311, EU version, material number 733254, 1 piece
• GEB221 li-ion battery, 7.4 V / 4.4 Ah, material number 733270, 1 piece
• IR remote control for Leica Piper, material number 746157, 1 piece
• Target set with small 300 mm insert, red, material number 725858, 1 piece
• User manual Leica Piper 100/200, German, material number 748821, 1 piece

The target set 725858 with the small 300 mm insert belongs to the kit. For other pipe sizes Leica offers the PTC100 target plate at 100 mm and the target assembly 915443 with a 150 mm to 300 mm insert. The GEB221 battery, the GKL311 charger and the IR remote control 746157 can also be ordered separately.

Standards and origin

The Leica Piper 100 is a class 3R laser product to IEC 60825-1:2014 with a maximum average radiant power of 4.75 mW. The protection class is IPx8, so the instrument is tested watertight. The manufacturer does not state a dust digit. The shipment contains a lithium-ion battery and is labelled accordingly. EAN 7640110693933, customs tariff number 9015301000, country of origin Singapore.