Pipe laser red 200 m laser class 2M with carrying case - Leica Piper 100

In sewer construction the invert level decides whether the line works. The Leica Piper 100 puts a red 635 nm reference beam into the pipe across a working range below 200 m and levels itself over -15 % to +30 %. The class 2M version is intended for sites where the lower laser class is mandatory.

Benefits

• Laser class 2M instead of 3R, this version meets stricter eye-safety requirements and can be used where class 3R is not permitted.
• Grade range -10 % to +25 % covers gravity sewers, storm water lines and house connections with one instrument. The self-levelling range goes further at -15 % to +30 %.
• Self-levelling accuracy plus/minus 1.5 mm at 30 m, the invert level stays within normal laying tolerances across the whole run.
• IPx8 protection and a cast aluminium housing, the laser keeps working in the shaft, in mud and under water. Operating temperature -20 °C to +50 °C.
• Li-Ion battery with up to 40 h of operation and a 4 h charge time, the instrument runs a full working week without a battery swap mid-shift.
• Remote control reaching 150 m from the front and 10 m from the back, grade and line position are adjusted from the trench.
• Compact at 96 mm diameter and 267 mm length, the instrument already works in pipes from 100 mm nominal bore.

Technical data

Applications

Waste water and storm water sewers, house connection lines, drainage, duct and cable runs, trench work in civil engineering and the renewal of existing runs.

Compatibility and scope of delivery

Supplied is the Piper 100 laser in the class 2M version in its carrying case, without further accessories. Depending on the job the following are added:

• Target assembly matched to the pipe diameter, for 300 mm pipe the red version with the small insert
• GEB221 Li-Ion battery, 7.4 V and 4.4 Ah plus the matching charger
• IR remote control for operation from the trench
• Trivet with mounting bracket for set-up inside a manhole
• Feet in the matching nominal size for 150, 200, 225, 250 and 300 mm

Accessories are interchangeable across the Piper line and also fit the Piper 200 as well as the green 100G and 200G versions. If the line has to be restored automatically after a break in work, the Piper 200 with Alignmaster is the model to choose.

Standards and origin

Laser class 2M to IEC 60825-1, protection class IPx8 to IEC 60529. Shipping weight 7.300 kg, EAN 7640110698013, customs code 9015301000, country of origin China. Original instrument from Leica Geosystems.