Pipe laser green 200 m laser class 3R with Alignmaster and case - Leica Piper 200G

On long runs two things cost time, finding the target spot at the far end and surveying the line in again after a break in work. The Leica Piper 200G answers both. The green 520 nm beam is rated by the manufacturer at around four times better visibility than a red one, and the Alignmaster function of the 200 line returns the line automatically to the reference set earlier.

Benefits

• Alignmaster for the second working day, the line is returned to the reference set earlier after the instrument is put back in place, so the run does not have to be surveyed in again.
• Green 520 nm beam with around four times better visibility, the target spot stays clearly readable even at the end of a 200 m run.
• Grade range -10 % to +25 % for gravity sewers, storm water lines and pressure mains, with a self-levelling range of -15 % to +30 %.
• Self-levelling accuracy plus/minus 1.5 mm at 30 m, the invert level stays within normal laying tolerances across the whole run.
• IPx8 protection and a cast aluminium housing, the instrument keeps working in the shaft, in mud and under water. Operation from -20 °C to +50 °C.
• Li-Ion battery with up to 40 h of operation and a 4 h charge time, one charge covers several working days.
• Remote control reaching 150 m from the front and 10 m from the back, grade and line position are adjusted from the trench.

Technical data

Applications

Sewer and waste water pipe laying, storm water and combined sewers, house connections, drainage, inverted siphons and duct runs, trench work in civil engineering and multi-day sites with repeated set-ups.

Compatibility and scope of delivery

The delivery contains the Piper 200G laser in the class 3R version with 150 mm feet in a carrying case. According to the manufacturer, battery and charger are not included. The following also fit:

• GEB221 Li-Ion battery, 7.4 V and 4.4 Ah with its charger, required for operation
• Target assembly matched to the pipe diameter, for 300 mm pipe the version with the small insert
• IR remote control for operation from the trench
• Trivet with mounting bracket for set-up inside a manhole
• Feet for 200, 225, 250 and 300 mm for other nominal bores

Accessories are interchangeable across the Piper line and also fit the Piper 100, Piper 100G and Piper 200. Where the better visibility of the green beam is not needed, the same specification is available with a red beam as the Piper 200.

Standards and origin

Laser class 3R to IEC 60825-1, protection class IPx8 to IEC 60529. Shipping weight 7.180 kg, EAN 7640180530794, customs code 9015301000, country of origin China. Original instrument from Leica Geosystems.