Cable locator to 4.6 m depth with more than 100 frequencies and IP65 - Leica Ultra Standard
-
This Item:
€3,042.00
-
Utility locating set 5 W to 4.6 m with signal clamp and bag - Leica Ultra System 5 W Standard
€6,029.71
-
Cable locator to 4.6 m depth with AIM interference measurement and Bluetooth - Leica Ultra Advanced
€4,118.40
Excavation work starts with the route marked on the ground. The Leica Ultra Standard locates cables down to 4.6 m and sondes down to 3.0 m, and estimates depth in active mode within ± 5 percent. Active locating with a signal generator, passive power tracing and radio mode sit in one instrument.
Key benefits
- Locating range of 4.6 m on cables and 3.0 m on sondes, depth estimate within ± 5 percent in active mode and ± 10 percent on passive signals.
- More than 100 selectable transmitter frequencies, only the ones suited to the site are enabled in the frequency menu, which shortens frequency changes in the field.
- An antenna configuration for each task, twin peak for the highest precision, single peak for more range, null for a sharp response, total field for sweeping an area.
- Passive mode on 50, 100, 150 Hz and 60, 120, 180 Hz finds live cables without a transmitter, radio mode traces cables that radiate VLF signals.
- Accessory operation with receiver clamp, stethoscope and sonde extends the instrument to line identification in chambers and to non-metallic pipes.
- IP65 protection, working temperature from -20 to +50 °C, 60 hours of intermittent use per set of D cells.
Technical data
| Model | Leica Ultra Standard |
|---|---|
| Instrument type | locating receiver for cables, pipes and sondes |
| Locating range cables | up to 4.6 m |
| Locating range sondes | up to 3.0 m |
| Depth tolerance active cable | ± 5 % over 0.2 to 3 m |
| Depth tolerance passive cable | ± 10 % over 0.15 to 3 m |
| Depth tolerance sonde | ± 5 % over 0.15 to 3 m |
| Active frequencies | more than 100 selectable transmitter frequencies |
| Passive power mode | 50, 100, 150 Hz and 60, 120, 180 Hz |
| Sonde mode | any frequency, locate and depth only |
| Radio mode | VLF, locate only |
| Antenna configurations | single peak, twin peak, null, left/right cable only |
| Additional signal evaluation | total field from all three axes |
| Not included | AIM interference measurement, wireless link to the transmitter, offset depth, data communication, GPS and cable fault finding remain Ultra Advanced functions |
| Accessory operation | receiver clamp, stethoscope, EML marker location, sondes |
| Battery | 2 D-cell alkaline |
| Operating time | 60 h intermittent use, 30 h continuous at 21 °C |
| Battery saver | shut off after 5, 10, 20 or 30 min inactivity |
| Display | LCD with LED backlight |
| Audio | speaker |
| Interfaces | Mini-USB, accessory port |
| Dimensions | 690.9 x 325.0 x 121.9 mm |
| Working temperature | -20 to +50 °C |
| Protection class | IP65 to IEC 60529, dust tight |
| Humidity | 95 % RH, non condensing |
| Shipping weight | 3.380 kg |
| EAN | 7640110697603 |
| Customs tariff number | 8543709099 |
| Country of origin | USA |
Applications
Route survey ahead of excavator work, cable and pipe laying, service connections, checking power, gas, water and telecom lines. With a sonde, non-metallic pipes and ducts are traced to 3.0 m, with the receiver clamp the right line is identified among several in a chamber.
Compatibility
The locator works with the Leica Ultra 5 W and 12 W signal generators. Signal clamps come in 80, 125 and 175 mm, alongside the receiver clamp, the stethoscope with a frequency range of 50 Hz to 200 kHz and the standard and maxi sondes at 8 kHz or 33 kHz. The EML accessory needs locator software v7.0 or higher.
Standards, origin and shipping
Conformity to FCC Part 15 and the applicable European directives, protection class IP65 to IEC 60529. The mains frequency of the country of use must be set before work, options are 50 and 60 Hz. Shipping weight 3.380 kg, EAN 7640110697603, customs tariff number 8543709099, country of origin USA.
| Weight | 3.380000 |
|---|---|
| Manufacturer | Leica Geosystems |
| Manufacturer Nr. | 818699 |
| EAN | 7640110697603 |
| HS-Code | 8543709099 |
| GPSR manufacturer information | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Condition of article | New |
| Article authenticity | Original product |
| Country of Manufacture | United States |
| Certification | IEC 60529 |
| Protection class (IP) | IP65 |
| Operating time (h) | 60.000000 |









