Pipe laser package red 200 m with Alignmaster and IR remote control - Leica Piper 200

Sewers, drainage runs and house connections are set to grade with the Leica Piper 200. The red 635 nm laser beam works up to 200 m along the pipe and the self-levelling holds ± 1.5 mm at 30 m. This package is the fully equipped version of the red line, because the Piper 200 carries the Alignmaster, the automatic targeting system that the manufacturer data sheet lists only for the Piper 200 and the Piper 200G, and the IR remote control ships in the same case.

Key benefits

• Alignmaster on board, the automatic targeting system stays reserved for the Piper 200 and the Piper 200G according to the data sheet.
• IR remote control with material number 746157 belongs to the package, it works over 150 m to the front and 10 m to the rear.
• Working range up to 200 m with a grade range from -10 % to +25 %, the self-levelling range covers -15 % to +30 %.
• Automatic grade compensation, when the housing is rolled by up to ± 3° the Piper corrects the resulting grade error itself.
• Up to 40 hours of operation on the supplied GEB221 li-ion battery, charging in the GKL311 takes 4 hours.
• Cast aluminium housing with IPx8 protection, a diameter of 96 mm lets the instrument enter pipes from 100 mm upwards.

Technical data

Applications

Sewer and pipeline construction, foul and storm water runs, house connections. The laser works inside the pipe, over the top and in the manhole, the grade range from -10 % to +25 % covers the usual falls in gravity sewers. At 96 mm diameter and 267 mm length the instrument fits into tight shafts and into pipes from 100 mm upwards. IPx8 protection and the cast aluminium housing are made for wet and dirty sites.

Scope of delivery

• Leica Piper 200 pipe laser (laser class 3R) with carrying case, material number 748774, 1 piece
• GKL311 Professional single charger, material number 799185, 1 piece
• GEV192 AC/DC power supply unit for GKL112/GKL311, EU version, material number 733254, 1 piece
• GEB221 li-ion battery, 7.4 V / 4.4 Ah, material number 733270, 1 piece
• IR remote control for Leica Piper, material number 746157, 1 piece
• Target set with small 300 mm insert, red, material number 725858, 1 piece
• User manual Leica Piper 100/200, German, material number 748821, 1 piece

The supplied target set 725858 with the small 300 mm insert covers small pipe diameters. For further cross sections Leica offers the target assembly 915443 with a 150 mm to 300 mm insert and the PTC100 target plate of 100 mm. The GEB221 battery and the GKL311 charger are part of the Leica accessory range and can be ordered separately, the GEV192 power supply unit serves both the GKL112 and the GKL311.

Standards and origin

The Piper 200 is a class 3R laser product to IEC 60825-1:2014 with a maximum average radiant power of 4.75 mW. Protection is rated IPx8, the manufacturer does not state a dust figure. The shipment contains a lithium-ion battery and is labelled accordingly. EAN 7640110693940, customs tariff number 9015301000, country of origin Singapore. The manufacturer is Leica Geosystems AG, Heinrich-Wild-Strasse, 9435 Heerbrugg, Switzerland.