Pipe laser green 200 m laser class 2M with carrying case - Leica Piper 100G
-
This Item:
€2,948.40
-
Pipe laser package red 200 m with target set, battery and charger - Leica Piper 100
€3,083.47
-
Pipe laser package red 200 m with Alignmaster and IR remote control - Leica Piper 200
€3,328.24
A green 520 nm beam is picked up far more readily by the eye than a red spot, around four times better according to the manufacturer. The Leica Piper 100G in the class 2M version combines that visibility with the lower laser class required on many sites and in many countries. Average radiant power is 1.2 mW.
Benefits
- Laser class 2M at only 1.2 mW average radiant power, this version meets stricter eye-safety requirements and can be used where class 3R is not permitted.
- Green 520 nm beam with around four times better visibility than a red beam, the target spot is found faster along the whole run.
- Grade range -10 % to +25 % for gravity sewers, storm water lines and house connections, with a self-levelling range of -15 % to +30 %.
- Self-levelling accuracy plus/minus 1.5 mm at 30 m, the invert level stays within normal laying tolerances across the section.
- IPx8 protection and a cast aluminium housing, the instrument keeps working in the shaft, in mud and under water. Operation from -20 °C to +50 °C.
- Li-Ion battery with up to 40 h of operation and a 4 h charge time, one charge covers several working days.
- Delivered with 150 mm feet, so the instrument sits centred in that nominal bore straight away, with further feet available up to 300 mm.
Technical data
| Feature | Value |
|---|---|
| Design | pipe laser, self-levelling |
| Beam colour and wavelength | green, 520 nm |
| Laser class | 2M |
| Max. average radiant power | 1.2 mW |
| Working range | under 200 m |
| Grade range | -10 % to +25 % |
| Self-levelling range | -15 % to +30 % |
| Self-levelling accuracy | plus/minus 1.5 mm at 30 m |
| Line movement | 6 m at 30 m |
| Alignmaster | no, feature of the Piper 200G only |
| Power supply | Li-Ion battery, up to 40 h operation |
| Charging time | 4 h |
| Operating temperature | -20 °C to +50 °C |
| Dimensions (diameter x length) | 96 mm x 267 mm |
| Instrument weight | 2.0 kg |
| Housing | cast aluminium |
| Protection class | IPx8 |
| Remote control range front | 150 m |
| Remote control range back | 10 m |
| Smallest pipe diameter | 100 mm |
| Feet supplied | 150 mm |
| Shipping weight with case | 7.470 kg |
| Packaging dimensions | 64.5 x 35.5 x 51 cm |
| EAN | 7640180530114 |
| Customs code | 9015301000 |
| Country of origin | China |
Applications
Sewer and waste water pipe laying, storm water and combined sewers, house connections, drainage and duct runs, in particular on sites with a requirement for the lower laser class.
Compatibility and scope of delivery
The delivery contains the Piper 100G laser in the class 2M version with 150 mm feet in a carrying case. According to the manufacturer, battery and charger are not included. The following also fit:
- GEB221 Li-Ion battery, 7.4 V and 4.4 Ah with its charger, required for operation
- Target assembly matched to the pipe diameter, for 300 mm pipe the version with the small insert
- IR remote control for operation from the trench
- Trivet with mounting bracket for set-up inside a manhole
- Feet for 200, 225, 250 and 300 mm for other nominal bores
Accessories are interchangeable across the Piper line and also fit the Piper 100, Piper 200 and Piper 200G. Where higher beam power is needed, the same model is available in laser class 3R.
Standards and origin
Laser class 2M to IEC 60825-1, protection class IPx8 to IEC 60529. Shipping weight 7.470 kg, EAN 7640180530114, customs code 9015301000, country of origin China. Original instrument from Leica Geosystems.
| Weight | 7.470000 |
|---|---|
| Manufacturer | Leica Geosystems |
| Manufacturer Nr. | 916020 |
| EAN | 7640180530114 |
| HS-Code | 9015301000 |
| GPSR manufacturer information | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Condition of article | New |
| Article authenticity | Original product |
| Country of Manufacture | China |
| Norm | DIN EN 60825-1 |
| Certification | IEC 60529 |
| Protection class (IP) | IPX8 |
| Range (m) | 200.000000 |
| Operating time (h) | 40.000000 |
| Laser class | 2M |
| Laser colour | green |








