Pipe laser package red 200 m laser class 2M with IR remote control - Leica Piper 100 2M

The Leica Piper 100 2M transfers grade and line directly inside the pipe and covers a working range below 200 m. The red beam at 635 nm runs at a maximum average radiant power of 1.2 mW, which places it in laser class 2M. That is the point of this version, because the 3R versions of the Piper call for additional safety requirements in some countries, while the 2M version allows work without that extra effort and keeps the full working range. With IR remote control, battery, charger, power supply unit and target set the package is ready for the trench.

Key benefits

• Laser class 2M at a maximum average radiant power of 1.2 mW, so the extra effort that some countries demand for the 3R versions does not apply and the working range below 200 m stays unchanged.
• Housing diameter of 96 mm over a length of 267 mm, so the laser fits into a pipe from 100 mm upwards.
• Automatic grade compensation for housing roll of up to ± 3°, the Piper corrects the resulting grade error by itself.
• Grade range from -10 % to +25 % and self-levelling from -15 % to +30 % with an accuracy of ± 1.5 mm at 30 m.
• The supplied IR remote control, material number 746157, drives the line up to 150 m to the front and up to 10 m to the rear.
• Li-ion battery with up to 40 h of operation and 4 h charging time, cast aluminium housing rated IPx8 for wet pipes and manholes.

Technical data

Applications

Sewer and pipeline construction, waste water lines and house connections. The Piper 100 2M works inside the pipe, over the top and in the manhole, transfers the planned grade onto the pipe axis and holds it section by section during laying. The IPx8 rating and the cast aluminium housing are built for wet and dirty sites.

Scope of delivery

• Leica Piper 100 pipe laser, laser class 2M, with carry case, material number 853810, 1 piece
• GKL311 Professional single charger, material number 799185, 1 piece
• GEV192 AC/DC power supply unit for GKL112 and GKL311, EU version, material number 733254, 1 piece
• GEB221 li-ion battery, 7.4 V / 4.4 Ah, material number 733270, 1 piece
• IR remote control for Leica Piper, material number 746157, 1 piece
• Target set with small 300 mm insert, red, material number 725858, 1 piece
• User manual Leica Piper 100/200, German, material number 748821, 1 piece

The GEB221 battery and the GKL311 charger are Leica standard components and can be reordered separately as spares or as a second set. Further target plates cover larger pipe diameters, for example the PTC100 target plate of 100 mm under material number 815613 or the target assembly with 150 mm to 300 mm insert under material number 915443. The IR remote control, material number 746157, is already part of this package.

Standards and origin

The instrument is a class 2M laser product to IEC 60825-1:2014 with a maximum average radiant power of 1.2 mW. The protection rating is IPx8, by which the manufacturer states water tightness. The package contains a lithium-ion battery and is labelled accordingly for shipping. Customs tariff number 9015301000, country of origin Singapore. The manufacturer is Leica Geosystems AG in Heerbrugg, Switzerland.