ESD transport dolly, black, 610 x 410 mm, 4 swivel castors, 2 with brake - Warmbier 5390.250

Containers and folding boxes holding ESD sensitive goods cannot be carried over longer distances without charging up both the operator and the load. This dolly runs on conductive solid rubber castors with a typical bleeder resistance of 10³ - 10⁴ ohms, so charge drains to the floor while it moves, and its 610 x 410 mm deck takes common container sizes.

Advantages

• Conductive rubber tyres and a bleeder resistance of 10³ - 10⁴ ohms, charge leaves through the ESD floor instead of building up on the trolley.
• Four swivel castors of 100 mm diameter, the dolly turns on the spot and passes narrow aisles between workstations.
• Twin-axis ball bearing swivel castors keep the run quiet and smooth even with a full load.
• Two of the four castors have a brake, so the dolly stays put while it is loaded and unloaded.
• Polypropylene frame and a dead weight of 4.7 kg, easy to move by hand and free of corrosion.
• Printed ESD marking identifies the dolly as ESD equipment inside the area.

Application

The dolly moves ESD containers, folding boxes and card racks between goods receipt, assembly, test and dispatch while the load stays inside the EPA. The 610 x 410 mm deck takes stacked containers and the brakes secure the stack at the workstation. On a grounded ESD floor the conductive tyres complete the path from load to earth, so transport does not create new charge.