Partner brandMade in Germany
TICKOPUR - cleaning concentrates for the ultrasonic bath
Special preparations for ultrasonic cleaning in industry, workshops and laboratories
TICKOPUR is the cleaner range of Dr. H. Stamm GmbH, a chemical manufacturer based in Berlin, Germany. The company develops special preparations for ultrasonic cleaning and disinfection, with TICKOPUR covering technical parts cleaning.
From the neutral cleaner R 30 and the universal cleaner R 33 to the flux remover TR 14 and the deoxidation solution J 80 U, each concentrate is matched to specific contaminants and materials. Besides ultrasonic cleaning, most products are also suitable for immersion, wipe and high-pressure cleaning.
From BerlinManufactured by Dr. H. Stamm GmbH, a chemical manufacturer in Berlin.
For electronicsTR 14 removes rosin flux and solder paste from PCBs in 30 to 180 seconds.
DeoxidisingJ 80 U brightens tarnished non-ferrous and precious metals in under 30 seconds of sonication.
Surfactant-free for labsR 36 cleans cuvettes and lab glass without interfering surfactant residues.TICKOPUR best sellers
Ultrasonic cleaning concentrate R 27, phosphoric acid based for descaling and rust removal, 5 litres - Tickopur 816
View product →
Intensive Cleaner Concentrate TR 13 for Coking and Resin Residues, Ultrasonic, 5 litres - Tickopur 848
View product →
Ammonia-based special cleaner RW 77 for plastic parts and service PCBs, ultrasonic use, 5 litres - Tickopur 871
View product →
Neutral cleaner concentrate R 30 for gentle ultrasonic cleaning and degreasing, 5 litres - Tickopur 811
View product →
Surfactant-Free Special Cleaner R 36 for Plastics, Glass and Cuvettes, Ultrasonic, 5 litres - Tickopur 854
View product →
Alkaline universal cleaning concentrate R 33 with corrosion protection for ultrasonic baths, 5 litres - Tickopur 831
View product →
Universal Cleaner Concentrate TR 7 for Ultrasonic Baths, Demulsifying, 5 litres - Tickopur 838
View product →
Special Grease Solvent R 32, Free of Complexing Agents, Corrosion Protection, 5 litres - Tickopur 832
View product →
The TICKOPUR product lines
Universal and neutral cleanersR 33, R 30, TR 7 and R 32 for everyday parts cleaning and gentle degreasing.13 products →
Intensive cleanersTR 13 dissolves carbon and resin deposits, for example on injectors and machine parts.23 products →
Electronics and laboratoryFlux remover TR 14, ammonia cleaner RW 77 and surfactant-free R 36.23 products →
Descaling and deoxidisingPhosphoric acid based R 27 against scale and rust, J 80 U against oxide and sulphide layers.23 products →
Special cleaners for the ultrasonic bath
Universal Cleaner Concentrate TR 3 for Cleaning in Ultrasonic Baths, 5 litres Container - Tickopur 935
View product →
Deoxidation Solution J 80 U for Non-Ferrous and Precious Metals, Ready to Use, 5 litres - Tickopur 881
View product →
Flux remover concentrate TR 14 for PCBs and solder stencils in the ultrasonic bath, 5 litres - Tickopur 861
View product →
Choosing the right TICKOPUR cleaner
Select by contamination and chemistry
The decisive factors are the contamination and the material:
- Sensitive parts: neutral cleaner R 30 for glass, ceramics, light metal and plastics.
- General contamination: R 33 (pH 9.9 at 1 %, with corrosion protection) or the demulsifying TR 7 (pH 8.9 at 1 %).
- Carbon and resin deposits: alkaline intensive cleaner TR 13 (pH 11.9 at 1 %).
- Scale, rust, oxides: R 27 (pH 1.9 at 1 %) or the ready-to-use J 80 U.
Electronics and analytics
TR 14 is intended for PCBs and solder stencils, RW 77 for service PCBs and plastic parts. In the laboratory, the surfactant-free R 36 avoids residues on cuvettes.
Dosage and pack size
Depending on the product and application, the concentrates are used at 0.1 to 20 %, only J 80 U is ready to use. Pack sizes range from 1 and 2 litres through 5 and 10 litres up to the 200-litre drum for R 33. Check bath volume and change interval before choosing the pack size.
Demulsifying or emulsifying
Demulsifying cleaners such as TR 7, TR 13 and R 36 let oil float to the surface, where it can be skimmed off so the bath lasts longer.
Which TICKOPUR cleaner fits?
| Criterion | R 30 | R 33 | R 27 | TR 14 |
|---|---|---|---|---|
| Type | Neutral cleaner | Universal cleaner | Special cleaner, acidic | Flux remover |
| pH at 1 % | neutral | 9.9 | 1.9 | - |
| Dosage | 1 to 5 % | 3 to 5 % | 5 % with ultrasound | 10 % |
| Sonication | 1 to 10 min, 20 to 80 °C | 1 to 10 min, 20 to 80 °C | 2 to 10 min, 20 to 60 °C | 30 to 180 s, 60 to 70 °C |
| Use | Glass, ceramics, light metal | Workshop and lab, with corrosion protection | Scale, rust, metal oxides | PCBs, solder stencils |
| Pack sizes | 1 l, 2 l, 5 l | 1 l to 200 l | 1 l, 5 l | 2 l, 5 l |
TICKOPUR at a glance
Frequently asked questions about TICKOPUR
Who makes TICKOPUR?
TICKOPUR is made by Dr. H. Stamm GmbH, a chemical manufacturer in Berlin, Germany, that develops special preparations for ultrasonic cleaning and disinfection.
Which TICKOPUR cleaner is suitable for everyday parts cleaning?
R 33 is intended for general contamination such as oil, grease, soot and grinding or polishing residues. It is mildly alkaline with pH 9.9 at 1 %, contains corrosion protection and is dosed at 3 to 5 %.
How do I remove flux from PCBs?
TR 14 saponifies rosin flux into water-soluble rosin soaps and also removes solder pastes. At 10 % dosage and 60 to 70 °C, a board is clean in 30 to 180 seconds without organic solvents.
Which cleaner leaves no surfactant residues?
R 36 is surfactant-free and suitable for cuvettes, lab glass and measuring parts. It is highly concentrated and works from a dosage of 0.25 %.
Can TICKOPUR cleaners be used without ultrasound?
Many concentrates such as R 30, R 32, R 33 and R 36 are also suitable for immersion, wipe and high-pressure cleaning. R 27 can be used without ultrasound at 10 to 20 % dosage with a longer exposure time.
Need advice or a professional price?
Our team helps you select the right TICKOPUR cleaner for your cleaning task and prepares a quotation for you.
