Universal insulation stripper, insulated and VDE tested, chrome plated, 160 mm, blister card - Knipex 11 06 160 SB

On installations that cannot always be switched off, only insulated tools may be used. The 11 06 160 SB insulation stripper carries insulated multi-component grips with VDE approval to IEC 60900 and strips solid, stranded and fine-stranded conductors with plastic or rubber insulation up to 5 mm diameter or 10 mm² cross-section.

Benefits

• Insulated grip covers, VDE tested to IEC 60900, for work on live parts up to 1000 V.
• Simple adjustment to the required strand diameter with the knurled screw, the lock nut secures the setting.
• One tool for solid, stranded and fine-stranded conductors with plastic or rubber insulation up to 5 mm outer diameter or 10 mm² cross-section.
• The opening spring returns the tool to its starting position after every stroke, which saves effort when many cores follow one another.
• Chrome plated body, overall length 160 mm.
• SB version, which means the tool is supplied on a self-service card in a blister. The same tool without blister packaging is listed by Knipex as 11 06 160.

Areas of use

Electrical installation, control cabinet and distribution board building, service and maintenance in buildings and industrial plants. It suits any workplace where insulated tools to IEC 60900 are required and the stripper still has to cover the usual range of conductor cross-sections.

Standards and conformity

In our catalogue the tool belongs to the VDE tools 1000 V according to IEC 60900, and the catalogue name states explicitly that it is VDE tested. A separate manufacturer page with standards data for the blister version is not available.

Note on the technical data

The manufacturer does not publish a separate data sheet page for the blister version 11 06 160 SB. EAN, weight and dimensions are therefore not stated here, because the figures of the version without blister are not confirmed for the SB version.