Digital Display Unit IZE113 with 4-20 mA Analog Output - A1-ESD EP0202004

The IZE113 digital display unit receives the signal of the IZD electrostatic sensor and shows the measured potential clearly. Two switching outputs and one analog output of 4 to 20 mA enable limit monitoring and low noise signal transmission over longer distances.

Benefits

• Two colour digital display for fast reading
• Two switching outputs for limit monitoring plus 4 to 20 mA analog output
• Correction function for sensing distance in 1 mm steps

Technical data

• Output: 2 x switching output + 1 analog output (4 to 20 mA)
• Supported sensors: ±0.4 kV and ±20 kV
• Smallest setting: 0.001 kV (at ±0.4 kV), 0.1 kV (at ±20 kV)
• Display accuracy: ±0.5 % of full scale ±1 digit
• Supply voltage: 24 V DC
• Dimensions: approx. 30 x 30 x 30 mm

Application

Evaluation and display of the electrostatic potential from the IZD110 and IZD510 sensors within the EPA, especially with longer signal lines.

Standards

Supports the ESD control programme to IEC 61340-5-1.