Dissipative profiled foam insert, pink, 183 x 127 mm, 20 mm high

When goods leave the ESD protected area, the insert decides whether they arrive undamaged and uncharged. At 183 x 127 mm this profiled foam insert covers the base of the larger Cortronic shipping boxes and cushions the whole area with a height of 20 mm.

Benefits

• The 183 x 127 mm format lies flat across the box base and needs no cutting at the packing station.
• Dissipative setting of approximately 10E7 to 10E11 ohm, so charges drain off in a controlled way instead of building up.
• The nub structure accepts components of differing heights and holds them in place during transport.
• The 20 mm height provides travel, so the packed goods never rest on the hard box base.
• The pink colour makes the antistatic packaging material easy to identify in the warehouse.
• At 0.1 kg per insert the shipping weight stays low.

Application

The typical place of use is the packing station inside the EPA, where populated boards, connector sets or test samples are prepared for dispatch. The insert goes onto the box base, the component is pressed into the nubs and stays fixed until goods receipt at the recipient. With flat assemblies a second insert serves as a cover from above so the part cannot shift inside the carton. The insert is equally suitable for in-house transport between the test station and the store. The range also covers further formats.