Images are examples, some edited with AI. The technical data are authoritative. AI notice
ESD Top Cutters EUROline Dissipative 120 mm with Outer Cutting Edge - Bernstein 3-674-15
This top cutter with an outer cutting edge trims fine wire up to Ø 0.8 mm soft completely flush, suited for both horizontal and vertical use. The narrow 9.5 mm head width with a 20 mm jaw length reaches confined spaces. The dissipative handle (10^6 to 10^9 ohm) meets EPA requirements.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
With an outer cutting edge, the Bernstein 3-674-15 trims fine wire flush, applied either horizontally or vertically against the workpiece, at just 9.5 mm head width.
Advantages
- Outer cutting edge for horizontal and vertical use
- Flush geometry with a small tip for a completely even cut
- Cutting capacity soft/medium/hard/piano 0.8/0.6/0/0 mm
- 20 mm jaw length at 9.5 mm head width for confined spaces
- Dissipative 2-component handle between 10^6 and 10^9 ohm for EPA zones
Application
For flush trimming of fine wire in confined spaces, applicable both horizontally and vertically, in electronics production within ESD protected areas.
Standards and Delivery Data
- Tested to DIN EN 61340-5-1, DIN EN 61340-2-1 and DIN EN 61340-2-3 for work in ESD protected areas (EPA)
- EAN 4250838502788
- Customs tariff number 82032000
- Country of origin Germany
Technical data
| Feature | Value |
|---|---|
| Cut type | Flush (mini side face, cut with small tip) |
| Cutting capacity soft / medium / hard / piano (Ø mm) | 0.8 / 0.6 / 0 / 0 |
| Head width | 9.5 mm |
| Blade length | 4.5 mm, jaw length 20 mm |
| Material | High-quality steel (HRC 56-58) |
| Surface | Glossy burnished |
| Handle | 2-component ESD plastic, ergonomically shaped, dissipative between 10^6 and 10^9 ohm |
| Length | 120 mm |
| Weight | 60 g |
| Manufacturer | Bernstein |
| Manufacturer Nr. | 3-674-15 |
| EAN | 4250838502788 |
| HS-Code | 82032000 |
| GPSR manufacturer information | BERNSTEIN Werkzeugfabrik Industriehof Trecknase 1 DE-42897 Remscheid www.bernstein-werkzeuge.de |
| Condition of article | New |
| Article authenticity | Original product |
| Lenght | 13 |
| ESD version | ESD (antistatic) |
| Certification | DIN EN 61340-2-1, DIN EN 61340-2-3, IEC 61340-5-1 |
Downloads
Datasheet
Catalogue
Certificate
Other
- Cases and Sets EN
- Bernstein Catalogue Pages Screwing Tools, Torque and Bits EN
- Bernstein Catalogue Pages Ball Joint Vices and Holders EN
- Bernstein Catalogue Pages VDE Tools EN
- Bernstein Catalogue Pages Pliers EN
- Bernstein ESD Guide EN
- Drehmoment Schraubendreher DE
- Kugelgelenk Schraubstock DE
- Schonbacken DE
- Bernstein Katalogseiten Schraubstöcke und Halter DE
- ESD Leifaden DE
- Bernstein Katalogseiten ESD Arbeitsplatz und ESD Handwerkzeuge DE
- Bernstein Katalogseiten Pinzetten DE
- Bernstein Katalogseiten VDE Werkzeuge DE
- Zangen DE
- Bernstein ESD Guide (Spanish)
- Bernstein ESD Guide (Russian)
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







